Advertisement
Quick Links
Synergy™ 10.1" All-In-One Touchpad Controller
SYN-TOUCH10
WyreStorm recommends reading through this document in its entirety to become familiar with the product's features prior to starting the
installation process.
IMPORTANT! Installation Requirements
• Read through the
Wiring and Connections
wiring guidelines before creating or choosing premade cables.
• Visit the product page to download the latest firmware, document
version, additional documentation, and configuration tools.
• The SYN-TOUCH10 is PoE compatible. To power the touchpad, simply
plug it into a 802.3at compatible network switch. If the network
switch is not PoE capable, a PoE injector (sold separately) can be
used, as well as the included 12V PSU.
Port/Button Description Guide
Before installation, please make note of the ports, descriptions and locations.
Port/Button
Description
Insert a SD card for loading an existing
SD Card
configuration file
Audio Out
Reserved
Connect to a USB flash drive for loading
USB 2.0
existed configuration file
Serial
Reserved
Table and Wall Mount Dimensions
90mm/3.54in
90mm
/3.54in
180mm/7.08in
Table Mounting Installation
WyreStorm recommends that this section is read through in its entirety before to ensure proper installation and avoid damaging the equipment.
Use the four Mounting
screws provided and place
through the holes on the
back of the table mount
Copyright © 2022 WyreStorm ProAV Corporation |
SYN-TOUCH10 Quickstart Guide | 221210
section for important
36.78mm/1.44in
80mm/
0.64in
80mm/
1.57in
142mm/5.59in
80mm/3.14in
wyrestorm.com
In the Box
1x SYN-TOUCH10 Touchpad
1x Table Top Stand
1x Wall Mount (US/UK/EU)
1x DC 12V PSU (US/UK/EU/AU)
4x Expansion Screws
4x Mounting Screws
1x M3L8 Hexagonal Screw
1x M3L8 Phillips Head Screw
1x Quickstart Guide
Port/Button
Description
RJ45
LAN connection for PoE+ and Control
OTG
Reserved
DC 12V power input for use if LAN
DC
connection does not support PoE
On/Off
Button to Power unit On/Off
80mm/
4.40in
Screw the four Expansion
screws into the back of
the SYN-TOUCH10
1 of 2
Quickstart Guide
INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973)
support@wyrestorm.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Wyrestorm Synergy SYN-TOUCH10
Summary of Contents for Wyrestorm Synergy SYN-TOUCH10
- Page 1 142mm/5.59in 80mm/3.14in 180mm/7.08in Table Mounting Installation WyreStorm recommends that this section is read through in its entirety before to ensure proper installation and avoid damaging the equipment. Use the four Mounting Screw the four Expansion screws provided and place screws into the back of...
- Page 2 Wiring and Connections WyreStorm recommends that all wiring for the installation is run and terminated prior to making connections to the switcher. Read through this section in its entirety before running or terminating any wires to ensure proper operation and to avoid damaging the equipment.
Need help?
Do you have a question about the Synergy SYN-TOUCH10 and is the answer not in the manual?
Questions and answers