Advertisement
Folding the FlexDrop2
7. Folding the FlexDrop2 can seem tricky at first, but once you do it a few
times, it's easy to do.
Notice the metal frame sewn into the FlexDrop2 is flat and sturdy.
NOTE: The trick to folding is getting the metal frame to bend toward you
when beginning the fold.
8. With the FlexDrop2 standing vertically in front of you, place right hand (if
right-handed) on upper right corner of the disc. Loosely hold the left side of
the frame simultaneously.
Figure 6
Figure 10
Take a step backwards as the corner collapses to approximately waist
height.
Figure 14
Arrange the the stacked panel so it fits in the carry bag.
For warranty registration and information, please visit www.photoflex.com®
Figure 7
Figure 11
Figure 15
Figure 8
Pull down on the corner in the diagonal direction while still holding loosely
onto the left side of the frame.
Figure 12
You should now be holding the frame in two hands and feel it beginning to
collapse.
Figure 16
Fits easily back into the provided nylon bag.
Figure 9
Figure 13
Figure 17
photoflexlightingschool.com®
Advertisement
