Table of Contents
Advertisement
Installation
Removing the freezer/fridge door
When removing the door
● Ensure the door is in the closed position.
● Handle the removed door carefully to keep it safe from damage and impact.
(Please refer to the illustrations below.)
1 Remove the top hinge cover.
Turn the hinge cover screw counterclockwise, and remove it.
2 Disconnect the connecting cable. (only the fridge door)
While pressing on the knob, pull out the cable in the direction shown by the arrow.
3 Remove the top hinge.
Turn the hinge screws and the grounding screw counterclockwise, and remove them.
● When removing the top hinge, take care to support the door so that it will not topple forward.
4 Remove the door.
Lift the door straight up from the bottom hinge, and remove it.
(Top hinge of freezer)
3
Attaching the doors and front grille
1 Follow the steps for removing the doors and grille in their reverse order.
2 Tighten up fixing screws after checking that the door is parallel to the body and cold air does
not leak from around the gasket.
3 Tighten up screws to fix hinges using both the screwdriver (Phillips head) and hex wrench.
8
1
2
(Top hinge of fridge)
1
3
2
Knob
Advertisement
Table of Contents
