Download Print this page

8BITDO SN30 Pro v2 User Manual

Bluetooth gamepad

Advertisement

Quick Links

Product name:8Bitdo SN30 Pro v2 Bluetooth GamePad
Model: 80DI SF30ProV2
Basic operation
Press START to turn on the controller
Press and hold START for 3 seconds to turn off the controller
Press and hold START for 8 seconds to force turn off the controller
Bluetooth connection
Switch
1.
Press START+Y to turn on the controller first, then press and hold PAIR for 3 seconds to
enter pairing mode. LED will,LEDs will start to rotate from left to right.
2. Go to your Switch Home Page to click on Controllers, then click on Change Grip/Order and
wait for controller to sync up. LED will become solid when connection is successful.
3. Controller will auto reconnect to your Switch with the press of START once it has been paired.
STAR button = Switch screenshot button, Home button = Switch HOME button.
Android
1. Press START+B to turn on the controller, LED 1 will start to blink.
2. Press and hold PAIR for 3 seconds to enter pairing mode. LED will rotate from left to right.
3. Go to your Android device's Bluetooth setting, pair with [8Bitdo SF30 Pro] or [8Bitdo SN30
Pro]. LED will become solid when connection is successful.
4. Controller will auto reconnect to your Android device with the press of START once it has
been paired.
USB Connection: connect the controller to your Android device via USB Cable after step 1.
Windows
1. Press START+X to turn on the controller, LEDs 1, 2 will start to blink.
2. Press and hold PAIR for 3 seconds to enter pairing mode. LEDs will rotate from left to right.
User Manual

Advertisement

loading

Summary of Contents for 8BITDO SN30 Pro v2

  • Page 1 2. Press and hold PAIR for 3 seconds to enter pairing mode. LED will rotate from left to right. 3. Go to your Android device’s Bluetooth setting, pair with [8Bitdo SF30 Pro] or [8Bitdo SN30 Pro]. LED will become solid when connection is successful.
  • Page 2 3. Go to your Windows device’s Bluetooth setting, pair with [8Bitdo SF30 Pro] or [8Bitdo SN30 Pro]. LED will become solid when connection is successful. Controller will auto reconnect to your Windows device with the press of START once it has been paired USB Connection: connect the controller to your Windows device via USB Cable after step 1.
  • Page 3 ·Sleep mode - 1 minute with no Bluetooth connection. ·Sleep mode - 15 minutes with Bluetooth connection but no use. ·Press START to wake up your controller. Support and firmware upgrade Please visit support.8bitdo.com for further information and additional support.
  • Page 4 FCC Statement 15.19 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

This manual is also suitable for:

80di sf30prov2