Picture Image Adjustment; Picture Position Adjustment - Sanyo PLC-SU22N Owner's Manual

Sanyo plc-su22n: owners manual

Hide thumbs Also See for PLC-SU22N:

Comparison chart (1 page)

Table Of Contents

Table of Contents

MCI MODE

Press the MENU button and the ON-SCREEN MENU will

appear. Press the POINT LEFT/RIGHT buttons to select

IMAGE

and press the SELECT button. Another dialog box

PICTURE IMAGE ADJUSTMENT Menu will appear.

Press the POINT DOWN button and a red-arrow icon will

appear. Move the arrow to the item by pressing the POINT

UP/DOWN buttons. To change the value press either the

POINT RIGHT button or the POINT LEFT button.

White balance (Red / Green / Blue)

Move the arrow to Red, Green, or Blue that you want to adjust.

Press POINT LEFT button to adjust the color of image lighter, and

press POINT RIGHT button to adjust deeper. (From 0 to 63.)

Contrast

Press POINT LEFT button to adjust the image lighter, and press

POINT RIGHT button to adjust deeper. (From 0 to 63.)

Brightness

Press POINT LEFT button to adjust the image darker, and press

POINT RIGHT button to adjust brighter. (From 0 to 63.)

Each of the keys operates as follow.

Reset

Recalls the data previously adjusted.

Stored

Stores the adjusted data in the memory.

Quit

Closes the PICTURE IMAGE ADJUSTMENT Menu.

The normal picture level is preset on this projector at the factory and

can be restored anytime you press the NORMAL button (located on

the Top Control or on the Remote Control Unit). The "Normal"

display will be displayed on the screen for a few seconds.

The position of the image can be adjusted vertically and horizontally through PICTURE POSITION

ADJUSTMENT.

Press the MENU button and the ON-SCREEN MENU will

appear. Press the POINT LEFT/RIGHT buttons to select

POSITION

POSITION dialog box will appear.

Move the image by pressing the POINT UP / DOWN / RIGHT /

LEFT buttons.