Table of Contents
Advertisement
Components
1.
Front Grill
2.
Fan Blade
3.
On/Off Switch
4.
Base Stand
5.
USB Charging Cable
(not shown)
Operating your Fan
Always operate this fan in an upright position, following all instructions and recommendations listed
in this manual.
To charge, plug the power cord into the connector on the fan, and the other end into a USB port. Be sure
that the USB plug fits tightly into the USB port. A loose connection may cause overheating and damage to
the USB plug or fan.
To operate the fan, press the on/off switch once for low setting, twice for medium setting and 3 times
for high setting. To turn the fan off, press the on/off switch a fourth time.
Disconnect the USB charging cable once the fan has finished charging.
Note: This fan can be charged by connecting the USB cable to a USB port on your laptop. When
plugged into your laptop USB port, the fan gets its power from the laptop itself. To avoid draining
your laptop battery, it is recommended to plug your laptop into a power source while using this fan.
1
2
3
4
Advertisement
Table of Contents
