Related Manuals for Philips 65PUT6703
Summary of Contents for Philips 65PUT6703
- Page 1 Register your product and get support at 6703 series www.philips.com/TVsupport User Manual 65PUT6703 65PUT6703S...
-
Page 2: Table Of Contents
Contents 13.3 App Gallery 1 Get Support 14 Ambilight 1.1 Identify and Register your TV 1.2 TV Help and User Manual 14.1 Ambilight Style 1.3 On-line Help and User Manual 14.2 Ambilight Brightness, Saturation 1.4 Consumer Care / Repair 14.3 Lounge Light Mode 14.4 Ambilight+hue 2 Software 14.5 Advanced Ambilight Settings... -
Page 3: Get Support
On-line Help and User Get Support Manual To solve any Philips TV related problem, you can Identify and Register your TV consult our online support. You can select your language and enter your product model number. Identify your TV - TV model number and serial Go to www.philips.com/TVsupport. -
Page 4: Software
back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV • press twice Update Software • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again. -
Page 5: Quick Guide
Quick Guide Remote Control Batteries and Cleaning Replace batteries If the TV does not react on a key press on the remote Standby / On control, the batteries might be empty. To switch the TV on or back to Standby. To replace the batteries, open the battery 2 - Playback and Record compartment on the back of the remote control. -
Page 6: Ir Sensor
2 - SMART TV channel list. To open the next or previous page in To open the Smart TV start page. Text/Teletext. To start the next or previous chapter on a disc. Colour keys Direct selection of options. Blue key , opens Help. 6 - ... - Page 7 3 - Press up or down to adjust the volume or tune to the next or previous channel. Press up or down to go through the list of sources, including the tuner selection. The menu will disappear automatically.
-
Page 8: Setting Up
Setting Up Read Safety • 65PUT6703 Read the safety instructions first before you use the VESA MIS-F 400x200, M6 (Minimum 10 mm, Maximum 16 mm) To read the instructions, in Help > User manual, Preparation press the colour key ... - Page 9 On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV. Switch On • Press the small joystick key on the back of the TV. Switch to standby To switch the TV to standby, press ...
-
Page 10: Connections
HDMI ports support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal Connections that prevents copying content from a DVD disc or Blu- ray Disc. Also referred to as DRM (Digital Rights Management). Connectivity guide Component Always connect a device to the TV with the highest quality connection available. -
Page 11: Audio Device
Headphones Audio Device You can connect a set of headphones to the connection on the side of the TV. The HDMI ARC connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately. Only HDMI 1 on the TV have HDMI ARC (Audio Return Channel). - Page 12 Miracast is about 1 second. The delay might be longer if you are using older devices with less processing Download the Philips TV Remote App from your power. favourite app store today. The Philips TV Remote App is available for iOS and Android and is free of charge.
-
Page 13: Other Device
press (Pause). Trying to pause will start the formatting. Other Device Follow the instructions on screen. When the USB Hard Drive is formatted, leave it USB Flash Drive connected permanently. You can view photos or play your music and videos from a connected USB flash drive. -
Page 14: Switch Source
Switch Source Source List • To open the sources menu, press SOURCES . • To switch to a connected device, select the device with the arrows (Right) or (Left) and press OK. • To close the source menu without switching to a device, press ... -
Page 15: Channels
for channels Channels 1 - Select Start now and press OK. 2 - Select Update channels to only add new digital channels. 3 - Select Start and press OK to update channels. About Channels and Switch This can take a few minutes. Channels Quick reinstall ... - Page 16 • Advanced: If you received a specific network Channel Update Message frequency value to search for channels, select Advanced. (Home) > Settings > Install Channels > Antenna/cable installlation > Channel Frequency step size update message The TV searches for channels in steps of 8MHz. If this results in having no channels installed or if When new channels are found or if channels are some channels are missing, you can search in smaller...
- Page 17 With Channel list copy, you can copy the channels procedure until you reach the country setting. installed on one TV onto another Philips TV of the Press BACK to cancel the installation.) same range. With Channel list copy, you avoid the If the country is correct continue with step 2.
-
Page 18: Channel List
and the broadcasted programme is not in your HbbTV on This Channel language (the language set on TV), the TV can show subtitles automatically in one of your preferred If you want to avoid access to HbbTV pages on a subtitle languages. -
Page 19: Favourite Channels
Channel List Options Select Channel List LIST > OPTIONS > Select channel list Open Option Menu Select a range of channels in a favourites channel To open the channel list option menu... list, once completed, press OK. • Press , to switch to TV. •... -
Page 20: Text / Teletext
list will be appended after your favourite channels for About Favourite Channels your preview. You need to add these channels into your favourite list to enable its operation (refer to "TV You can create a favourite channel list that only holds Guide"... - Page 21 the teletext will be unavailable via TV. In that case, the set-top box’s teletext can be used instead. Text Options In Text/Teletext, press OPTIONS to select the following… • Freeze page To stop the automatic rotation of subpages. • Dual screen / Full screen To show the TV channel and Text alongside each other.
-
Page 22: Tv Guide
Change Day TV Guide If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press - to go back to the previous day. What You Need Alternatively, you can press ... - Page 23 Set a Recording You can set a recording in the TV Guide. In the TV Guide, a programme set to be recorded is marked with . To see the recording list, press Recordings , a programme set to be recorded is marked with ...
-
Page 24: Recording And Pause Tv
To record a programme… Recording and 1 - Press TV GUIDE. 2 - On the TV guide, select the channel and programme you wish to record. Press (Right) Pause TV or (Left) to scroll through the programmes of a channel. -
Page 25: Pause Tv
a button and use the (up) or (down) keys to Replay set the hours and minutes. 9 - Select Schedule and press OK to schedule the Since the TV stores the broadcast you are watching, manual recording. you can mostly replay the broadcast for a few The recording will appear in the list of scheduled seconds. -
Page 26: Videos, Photos And Music
Photo Options Videos, Photos and With a photo on screen, press OPTIONS to… Music List/Thumbnails View photos with list view or thumbnails view. Shuffle off, Shuffle on 10.1 View the pictures in sequential order, or at random. From a USB Connection Repeat, Play once View the pictures repeatedly or once only. -
Page 27: Music
Video Options During the video playback, press OPTIONS to… Subtitles Display the subtitles if available, select On, Off, or On during mute. Charater set Select one of system for charater. Audio language Play the audio language if available. Status Display file information, like sound mode. -
Page 28: Open Tv Setting Menus
ideal sound settings. • Audio out - Set the TV to play the sound on TV or Open TV Setting on the connected audio system. • Ambilight style* - Select one of preset Ambilight Menus styles. • Ambilight+hue* - Switch Ambilight+hue on or off. •... - Page 29 Restore a style Expert mode picture settings To restore the style to its original setting, go Colour Settings to (Home) > Settings > All settings > Picture > Picture style, then (Home) > Settings > All press Restore style.
- Page 30 edges and details. HDR Plus (Home) > Settings > All settings > Picture > Expert mode settings > HDR Picture Clean Plus Noise reduction (Home) > Settings > All Set HDR Plus to Off, Minimum, Medium, Maximum settings > Picture > Expert mode settings > Noise to set the level at which the TV automatically shows reduction superior contrast and brightness effect for HDR...
- Page 31 Note: Only available when Motion styles set Sound Settings to Personal. Sound Style Picture Format Select a style (Home) > Settings > All For easy sound adjustment, you can select a preset settings > Picture > Picture format sound style. If the picture is not filling the whole screen, if black ...
- Page 32 TV Placement Digital Output Settings (Home) > Settings > All settings > Sound > TV Digital output settings are available for SPDIF output placement (optical) and HDMI ARC sound signals. Digital out fomat Select On a TV stand or On the wall to have best ...
- Page 33 setting is 60ms. USB Keyboard Settings (Home) > Settings > All settings > General settings > USB keyboard settings Channels To install the USB keyboard, switch on the TV and TV Guide connect the USB keyboard to one of the USB connections on the TV.
- Page 34 property of their respective owners. (Home) > Settings > All settings > General settings > Eco settings > Switch off timer Press the arrows (up) or (down) to adjust the HDMI Ultra HD value. The value 0 (Off) deactivates the automatic switch off.
- Page 35 language > Language > Primary text, Secondary Reset TV Settings and Reinstall TV text Reset all settings value to original TV settings Some digital TV broadcasters have several Text languages available. (Home) > Settings > All settings > General settings >...
- Page 36 always switch off your TV earlier or reset the time • Set Audio effect to On for extra audio effects in during the countdown the commentary audio, like stereo or fading sound. • Select Speech to set speech preference, Descriptive or Subtitles. Postal Code ...
-
Page 37: Network
> Network > Connect to network > WPS Home Network If your router has WPS, you can directly connect to To enjoy the full capabilities of your Philips Smart TV, the router without scanning for networks. If you have your TV must be connected to the Internet. -
Page 38: Network Settings
> Network > Clear Internet Memory connection. 2 - You can set the number for IP With Clear Internet Memory you clear your Philips Address, Netmask, Gateway, DNS 1, or DNS 2. server registration and parental rating settings, your video store app logins, all Philips App Gallery favourites, Internet bookmarks and history. -
Page 39: Smart Tv
App gallery does not hold what you are looking for, try the World Wide Web and surf the Internet on TV. Smart TV Search With Search, you can search the App Gallery for 13.1 relevant Apps. Setup Smart TV Enter a keyword in the text field, select and press OK to start searching. -
Page 40: Ambilight
Ambilight Follow Flag (Home) > Settings > All settings > Ambilight > Ambilight style > Follow 14.1 flag Ambilight Style Select one of the preset flag styles. (Home) > Settings > All settings > Ambilight > Ambilight style Follow App You can select the way Ambilight follows. -
Page 41: Ambilight+Hue
2 - Select Start now and press OK. The TV will 3 - First indicate where you placed the bulb relative search for the Philips Hue Bridge. If the TV is not yet to the TV. A correct setting of the Angle will send the connected to your network, the TV will start the correct Ambilight colour to the bulb. -
Page 42: Advanced Ambilight Settings
> Ambilight > Ambilight + hue > Lounge light+hue If you installed Ambilight+hue, you can let the hue bulbs follow Lounge light from Ambilight. The Philips hue lamps will expand the Lounge light effect across the room. (Home) > Settings > All settings >... -
Page 43: Netflix
Netflix If you have a Netflix menbership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby. -
Page 44: Environmental
Environmental 16.1 End of Use Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. -
Page 45: Specifications
17.3 Composite Display Resolution • PAL, NTSC, SECAM Component Diagonal screen size • 480i • 65PUT6703 : 164 cm / 65 inch • 480p Display resolution • 576i • 3840 x 2160 • 576p • 720p - 50Hz, 60Hz • 1080i - 50Hz, 60Hz 17.4... -
Page 46: Sound
• 1920 x 1200 - 60Hz • Network LAN - RJ45 • 3840 x 2160 - 60Hz • Antenna (75 ohm) • HDMI 1 in - ARC - UHD • HDMI 2 in - UHD - HDR 17.6 Sound • Dynamic Surround •... -
Page 47: Troubleshooting
Philips startup screen > User manual to find the information you are looking When the TV is in standby, a Philips startup screen is for. Select a keyword to go the most relevant page in displayed, then the TV returns to standby mode. This the User manual. -
Page 48: Picture
• Redo the installation and check if you select the Press Settings > Help > Check the TV. correct country. If the video clip stays black, call Philips. Wait until the clip ends and select Contact info in the Help menu. No analogue channels found during the installation Call the telephone number for your country. -
Page 49: Sound
18.7 A banner appears HDMI - UHD If an on screen promotion banner appears occasionally or the Picture style automatically switches back to Vivid at startup, the TV is in Shop HDMI location. Set the TV to Home location for use at •... -
Page 50: Wi-Fi And Internet
Cannot connect to Philips Smart TV server • If the Internet connection is OK, but cannot connect to Philips Smart TV server, you can perform “Clear Internet Memory” via (Home) > Settings > All settings > Network > Clear Internet Memory and try to connect again. -
Page 51: Safety And Care
The remote control may contain coin-type batteries from the power outlet immediately. which can easily be swallowed by small children. Contact Philips TV Consumer Care to have the TV Keep these batteries out of reach of children at all checked before use. -
Page 52: Screen Care
Humidity In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours. -
Page 53: Terms Of Use
TP Vision, which is the manufacturer of the for early integration in its products. product. TP Vision is the warrantor in relation to the TV with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. -
Page 54: Copyrights
Copyrights 21.1 21.5 MHL, Mobile High-Definition Link and the MHL Logo Wi-Fi Alliance are trademarks or registered trademarks of the MHL, LLC. Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. 21.2 HDMI 21.6 The terms HDMI and HDMI High-Definition Other Trademarks Multimedia Interface, and the HDMI Logo are... -
Page 55: Open Source
P1003.2/ISO 9945.2 Shell and Tools standard. It offers functional improvements over sh for both Open Source programming and interactive use. In addition, most sh scripts can be run by Bash without modification. 22.1 Source: http://www.gnu.org/software/bash/ Open Source Software c-ares (1.10.0) This television contains open source software. - Page 56 The GNU Find Utilities are the basic directory Source: http://www.gnu.org/software/inetutils/ searching utilities of the GNU operating system. These programs are typically used in conjunction with iptables (1.4.15) other programs to provide modular and powerful For Cross connection. directory search and file locating capabilities to other Source: http://www.netfilter.org/projects/iptables/ commands.
- Page 57 libusb. ain_Page This piece of software is made available under the terms and conditions of the libusb license, which can mtd-utils be found below. The aim of the system is to make it simple to provide Source: a driver for new hardware, by providing a generic http://libusb.wiki.sourceforge.net interface between the hardware drivers and the upper http://www.libusb.org/...
- Page 58 procps (ps, top) (3.2.8) to run . procps is the package that has a bunch of small This piece of software is made available under the useful utilities that give information about processes terms and conditions of the u-Boot loader license, using the /proc filesystem.
-
Page 59: Disclaimer Regarding Services And/Or Software Offered By Third Parties
Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations. -
Page 60: Index
Digital Out Offset 32 Dynamic Contrast 30 Parental Rating 36 Dynamic surround 31 Pause TV 25 Philips Support 3 Photos, Videos and Music 26 End of Use 44 Picture Clean, Noise Reduction 30 Energy Saving 34 Picture Contrast Menu 29... - Page 61 Picture Style 28 Update Software - OAD 4 Picture, Colour 29 Update Software - USB 4 Picture, Contrast 29 USB Flash Drive 13 Picture, Sharpness 29 USB Hard Drive 33 Postal code 36 USB Hard Drive - Format 13 Power Cable 8 USB Hard Drive - Install 13 Problems 47 USB Hard Drive Connection 13...