Sanyo PDG-DXL100 Quick Reference Manual page 9

To quick change
remote control code,
press "MENU" and
"IMAGE" buttons
about 10 seconds at the
same time.
7 INPUT
8 D.ZOOM -
9 KEYSTONE +/- Adjust the image to compensate for
10 LAMP CON-
TROL
11 AV-MUTE
12 COMPUTER 1
13 COMPUTER 2
14 FREEZE
15 Four
Directional Se-
lect Keys
16 ASPECT
17 D.ZOOM +
18 INFORMATION Display information menu.
19 VOLUME +/-
20 Keypad 1~9
21 AUTO. ADJ
22 HDMI
23 S-VIDEO
24 VIDEO
Press "INPUT" to choose RGB, SCART,
Component, S-Video, Composite and
HDMI sources.
Zoom out the projector display.
distortion caused by tilting the projec-
tor.
Select the lamp mode.
Mode" function
)
Momentarily turn off/on the audio
and video.
Press "COMPUTER 1" to choose Com-
puter in 1/Component in 1 connector.
Press "COMPUTER 2" to choose Com-
puter in 2/Component in 2 connector.
Pause the screen image. Press again to
resume the screen image.
Use
or or or
make adjustments to your selection.
Display the "Aspect Ratio" section of
the on-screen display menu to select
the desired aspect ratio.
Zoom in the projector display.
Increase/decrease speaker volume.
For input a password in the "Security
settings".
Automatically synchronize the projec-
tor to the input source.
Press "HDMI" to choose HDMI con-
nector.
Press "S-VIDEO" to choose S-Video
connector.
Press "VIDEO" to choose Video con-
nector.
"ECO
(refer
to select items or
9