LG FV1410H3P Owner's Manual page 34

global_main.book.book Page 34 Wednesday, January 26, 2022 10:19 AM
OPERATION
34
3
Change the washing programme (Rinse+,
Temp. and Spin) as necessary.
4
To use special options, press Steam or
TurboWash button.
5
Press the Start/Pause button.
Using Basic Options
You can customize the programmes by using the
following basic options:
Pre Wash
This option is recommended when washing a
heavily soiled load.
1
Press the Power button.
2
Select a washing programme.
3
Press and hold the Steam button for 3
seconds.
4
Press the Start/Pause button.
Add Item
You can use this option in order to add or remove
clothes after the washing programme has started.
1
Press the Power button.
2
Select a washing programme.
3
Press the Start/Pause button.
4
Press the Add Item button as necessary.
5
Open the door after it unlocks itself and add or
remove necessary clothing items.
6
Close the door and press the Start/Pause
button.
NOTE
• For safety reasons, the door remains locked
when the water level or temperature inside of
the drum is high. It is not possible to add clothes
at this time.
Delay End
You can set this function so that the appliance
starts automatically and finishes after a specified
time interval.
1
Press the Power button.
2
Select a washing programme.
3
Press the Delay End button as necessary.
4
Press the Start/Pause button.
NOTE
• Except for LED of the Delay End button, all LEDs
on the control panel will be turned off within 20
minutes. This feature may vary depending on
the model purchased.
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, clothes
and other factors.
• To cancel the function, the Power button should
be pressed.
• Avoid using liquid detergent for this function.
Settings
Child Lock
Use this option to disable the controls. This
function can prevent children from changing cycles
or operating the appliance.
NOTE
• Once this function is set, all buttons are locked
except the Power button.