Table of Contents
Advertisement
Setting Up a Sprint PCS
Wireless Web Connection
Getting Started
Your wireless Internet-ready Sprint PCS Phone allows you to
connect to a laptop PC, hand-held or palm-sized computing
device to send and receive e-mail, access the Internet or your
company's network and more, without searching for a wall-
mounted telephone jack. In just three steps, you can use
your connectivity:
First, you'll need a Sprint PCS Wireless Web
1.
Connection Kit (sold separately). For purchase
information, see page 141 in the Accessories section.
Connect your laptop PC to your Sprint PCS Phone by
2.
using the serial data cable. The cable adapter will
connect to a handheld or palm-sized computing device.
Finally, take a few minutes to install the Sprint PCS
3.
Dialer
SM
software onto your computer using the CD.
For complete details on how to install and use the
software, refer to the user guide in the Sprint PCS
Wireless Web Connection Kit you purchased.
Placing a Data Call
To place a data call when you're connected to the Sprint PCS
Wireless Web:
First, make sure the cable is connected properly.
1.
Open the Sprint PCS Dialer application on your computer
2.
and place the call.
The phone displays the number your computer is calling
and a "connecting" message is displayed.
Once the call successfully connects, your phone's display
shows you information on the status of the data call.
Section 15
136 Experiencing Sprint PCS Wireless Web
Receiving Sprint PCS Wireless Web Calls
Most users use the Sprint PCS Wireless Web Connection to
place outgoing data/fax calls. But you can also set up your
Sprint PCS Phone to receive (host) data and fax calls.
Because each phone model is different, the Sprint PCS
Wireless Web Connection Kit doesn't include instructions for
how to set up your phone to receive data and fax calls. Here's
the procedure to set up your Sprint PCS Phone to receive a
(mobile-terminated) data or fax call:
Data/Fax Mode
The Sprint PCS Wireless Web
TM
Connection Kit (purchased
separately) lets you link your laptop PC to your Sprint PCS
Phone so you can send and receive data and faxes.
Before starting this feature, connect your PC to SCP-4700 by
using the serial data cable.
Receiving a Fax
To receive a fax with your phone:
From the main menu, highlight
and press
1.
Setup
Highlight
and press
.
2.
Data/Fax (In)
Highlight
and press
.
3.
Incoming Fax
Receiving Data
To receive data with your phone:
From the main menu, highlight
and press
1.
Setup
Highlight
and press
.
2.
Data/Fax (In)
Highlight
and press
3.
Incoming Data
Returning to Voice Mode
To return to Standby mode at the end of a data or fax
transmission, follow these steps.
To return to Standby mode from Data/Fax mode:
From the main menu, highlight
and press
1.
Setup
Highlight
and press
.
2.
Data/Fax (In)
Highlight
and press
.
3.
Disable
Experiencing Sprint PCS Wireless Web 137
.
Note:
When your phone is in
data/fax mode, you
cannot make or
receive voice calls.
.
.
.
Section 15
Advertisement
Table of Contents
