20
Operating
7. Press green (G) colored button to display the
[Device Selection] menu.
8. Use w/s to select [
or [
USB] and press ENTER (b) for target
device.
9. (Disc only)
Use w/s to select a desired Rec Mode Set [XP,
3
SP, LP or EP] and press ENTER (b).
There are four preset copying quality modes:
[XP] – Highest quality setting, gives about 1
hour of recording time on a DVD (4.7 GB).
[SP] – Default quality, sufficient for many
applications, gives about 2 hours of recording
time on a DVD (4.7 GB).
[LP] – Slightly lower video quality, gives about
3 hours of recording time on a DVD disc (4.7
GB).
[EP] – Low video quality, gives about 4 hours of
recording time on a DVD (4.7 GB).
10. Use a/d to select [Yes], and press ENTER (b)
to start copying.
DISC], [
HDD]
11. (Disc only)
It starts to copy to DVD after preparing video.
After completing copy to DVD, you can see the
copy list.
12. Press BACK (1) to exit the copy list.