Table of Contents
Advertisement
Digital audio connector (4-1 pin SPDIF_OUT)
Connect the S/PDIF Out module cable to this connector, then
install the module to a slot opening at the back of the system
chassis.
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front
panel audio I/O module cable to this connector.
PCI Express 3.0/2.0 x1 slots
This motherboard supports PCI Express x1 network cards, SCSI cards, and other
cards that comply with the PCI Express specifications.
PCI Express 3.0/2.0 x16 slot
This motherboard has a PCI Express 3.0/2.0 x16 slot that supports PCI Express
3.0/2.0 x16 graphic cards complying with the PCI Express specifications.
USBUltra power connector (15-pin SATA_PWRCON)
Connect the USBUltra power cable to this connector to provide extra power to the
USB ports at the back panel directly from the PSU.
IRQ assignments for this motherboard
SATA Controller
HD Audio
XHCI Controller
LAN
PCIE x16
PCIE x1_1
PCIE x1_2
1-4
•
We recommend that you connect a high-definition front panel audio
module to this connector to avail of the motherboard's high-definition audio
capability.
•
If you want to connect a high-definition front panel audio module to
this connector, set the Front Panel Type item in the BIOS setup to [HD
Audio]. If you want to connect an AC'97 front panel audio module to this
connector, set the item to [AC97]. By default, this connector is set to [HD
Audio].
A
shared
shared
shared
–
shared
–
–
B
C
–
–
–
–
–
–
–
–
–
–
shared
–
–
shared
Chapter 1: Product introduction
PIN 1
SPDIF_OUT
D
–
–
–
shared
–
–
–
Advertisement
Table of Contents
