Data Connection Status And Indicators; Launching A Web Connection - Sanyo Mirro User Manual

Updating Your User Name
If you choose to change your user name and select a
new one online, you must then update the user name
on your phone.
Press
> Settings > Others > Data >
Update Data Profile
completing the update.)

Launching a Web Connection

Press . (Your data connection starts and
> Web
you see the SprintWeb
Note If Net Guard is enabled and displayed (see page 49),
press YES (left softkey) to continue and launch the
Web.
If Parental Controls is on and the Web is restricted,
you cannot launch a Web connection. (See
page 46.)
While connecting, you may see an animation before
the home page appears.
112 3B. Web and Data Services

. (To cancel, press
SM
home page.)
Tip

Data Connection Status and Indicators

before
Your phone displays the current status of your data
connection through indicators at the top of the screen.
The following symbols are used:
You are connected to the Sprint 1xRTT data
network. Data is being transferred (for example,
when you are opening a Web page) and you
cannot receive calls.
You are connected to the network but data is not
currently being transferred (for example, when you
are viewing a Web page that is completely open),
and you can receive calls.
If you do not see an indicator, your phone does not have
a current data connection. To launch a connection, see
"Launching a Web Connection."
To change the default launch page to the last page
you viewed, press TOOLBAR (right softkey) and
select OPTIONS > Advanced > Startup page > 
The last page I viewed > DONE (left softkey).