Advertisement
Available languages
Available languages
Quick Links
xDIM Quick Start Guide
1
3
4 M3 x 8 mm screws
hand tight, 2 in-lbs
USB 2.0
USB 2.0
xDIM G2
2
Unpacking the xDim G2
xDim G2
4 Machine Screw M3 X 8mm
CLA
Setting up the xDim G2
Attach to xDock G2 with 4 M3 Machine Screw (hand tight or 2 in-lbs)
Insert CLA into any 12 volt Vehicle Power Port
Insert USB 2.0 device in 2 each USB Receptacles
Compatible Models
RangerX
Support
For assistance or support in using your xDock G2, contact your help desk,
value added reseller or xplore. www.xploretech.com/support
NOTICE: The information in this publication is subject to change without notice. Xplore
Technologies Corp shall not be held liable for technical or editorial errors or omissions
contained herein nor for accidental or consequential damages resulting from the furnishing,
performance, or use of this material. Copyright © 2003-2014 Xplore Technologies Corp. All
rights reserved
Safety and Regulatory: For safety and regulatory information, see the Safety and Regulatory
sec on in the users handbook packaged with your Tablet PC.
PN: 95-01109
Advertisement
Summary of Contents for Xplore xDIM
- Page 1 For assistance or support in using your xDock G2, contact your help desk, value added reseller or xplore. www.xploretech.com/support NOTICE: The information in this publication is subject to change without notice. Xplore Technologies Corp shall not be held liable for technical or editorial errors or omissions contained herein nor for accidental or consequential damages resulting from the furnishing, performance, or use of this material.
- Page 2 éditoriales ni des omissions contenues dans ce document ni des dommages accidentels ou indirects qui résultent de l’emploi, de la performance, ou de l’utilisation de ce matériel. Copyright © 2003-2014 Xplore Technologies Corp Tous droits réservés.