Imation Matchprint Professional Server Hardware Installation

Hide thumbs

Table of Contents

Quick Links

Download this manual

Hardware Installation and Startup Guide

Imation Matchprint™ Professional Server

Version 2.0

Contents

PRODUCT SAFETY AND COMPLIANCE ..............................................................................2

SPECIFICATIONS.......................................................................................................................4

UNPACKING ................................................................................................................................5

CART ASSEMBLY......................................................................................................................6

SERVER INSTALLATION AND CABLING.............................................................................7

PRINTER SETUP ......................................................................................................................11

PRINTER CALIBRATION ........................................................................................................12

SPECTROCAM TIPS AND TROUBLESHOOTING.............................................................18

SYSTEM TROUBLESHOOTING ............................................................................................19

HOW TO REPLACE THE BATTERY.....................................................................................20

Table of Contents

Troubleshooting

Need help?

Do you have a question about the Matchprint Professional Server and is the answer not in the manual?

Questions and answers

Summary of Contents for Imation Matchprint Professional Server

Page 1: Table Of Contents
Hardware Installation and Startup Guide Imation Matchprint™ Professional Server Version 2.0 Contents PRODUCT SAFETY AND COMPLIANCE ................2 SPECIFICATIONS........................4 UNPACKING ..........................5 CART ASSEMBLY........................6 SERVER INSTALLATION AND CABLING................7 PRINTER SETUP ........................11 PRINTER CALIBRATION ......................12 SPECTROCAM TIPS AND TROUBLESHOOTING.............18 SYSTEM TROUBLESHOOTING ....................19 HOW TO REPLACE THE BATTERY..................20...
Page 2: Product Safety And Compliance
The user must never remove chassis covers. Some system circuitry retains voltage even when the system is turned off. Only qualified service technicians should remove chassis covers. There are no user-serviceable components in the Imation server. Refer all system repair to a qualified service technician Warning The power supply voltage standby circuit is active when the computer is turned off.
Page 3 The radiated and conducted emissions are per EN 55022 class B limits. The radiated and conducted immunity are per EN 55024 class B limits. The Imation Matchprint™ Professional Server fulfills the following European Directives and their current amendments: 73/23/EEC, Low Voltage Directive (LVD) and 89/336 ECC Electromagnetic Compatibility Directive.
Page 4: Specifications
Hardware Installation and Startup Procedure Specifications The Imation Matchprint™ Professional Server comes in three boxes. Monitor box not shown. Server and cables Cart (optional) Monitor Shipping Carton Specifications IMN part number Description Dimensions Weight L x W x H Lbs.
Page 5: Unpacking
Hardware Installation and Startup Procedure Unpacking Unpack the Imation Matchprint™ Professional Server. The following items are included in your shipping box: • Imation Matchprint™ Professional Server • Monitor • Keyboard • Mouse • Print cable • Scan cable • Power cable •...
Page 6: Cart Assembly
Hardware Installation and Startup Procedure Cart Assembly Assemble the cart table-top, shelf and wheels as shown in the following graphic: Imation Corp. ©2001 52-0001-4320-7, Rev. B...
Page 7: Server Installation And Cabling
Use the location shown in the graphic on page 6.) b) Connect the keyboard cable to the purple connector on the Imation server. The keyboard cable has a corresponding purple connector. c) Connect the mouse cable to the corresponding connector on the Imation server.
Page 8 Hardware Installation and Startup Procedure Connect the power cable to the Imation server and AC power outlet. g) If your Xerox DocuColor 12 LP requires a Spectrocam external calibration device, connect the Spectrocam to the COM 1 port. Warning Do not modify or use any AC power cord other than the one included with shipping.
Page 9 The Imation Matchprint™ Professional Server software comes preloaded. System power up takes about 30 seconds. A screen prompt appears saying: “Please select operating system to start.” Leave the default selection as Imation Matchprint™ Professional Server. The system will automatically boot after 5 seconds.
Page 10 Hardware Installation and Startup Procedure 6. After the log on information is entered, click OK. 7. To launch the program, double-click on the Imation Matchprint™ Professional Server icon located on the desktop. Imation Corp. ©2001 52-0001-4320-7, Rev. B...
Page 11: Printer Setup
Tray 5 is a manual feed tray located on the left side of the Xerox DocuColor 12. (Tray 5 is not configured here.) Load paper so the watermark wording is face down in the tray. Imation Corp. ©2001 52-0001-4320-7, Rev. B...
Page 12: Printer Calibration
Shut down the computer. Make sure you have connected the Spectrocam™ to the COM 1 (or appropriate) serial port on the back of the Imation Matchprint™ Professional Server. Plug the Spectrocam power connector into the AC adapter and then plug the AC adapter into a power outlet.
Page 13 The Last Calibration column displays the time elapsed since a particular media has been calibrated. Uncalibrated medias display " n/a" in this column. If the time elapsed is longer than the calibration interval, the “Calibrated?” column will say No. Imation Corp. ©2001 52-0001-4320-7, Rev. B...
Page 14 From the Device drop-down list box, choose either the DocuColor 12 Scanner or the Spectrocam Device. From the Media Type drop-down list box, select the media to be calibrated. Note: Transparency media cannot be calibrated. Imation Corp. ©2001 52-0001-4320-7, Rev. B...
Page 15 DocuColor 12. An Automatic selection chooses the input tray if no input tray is specified. If ExtraHeavyweight or an Imation/Xerox co- branded media is selected, the input tray defaults to Manual Feed. In this case, the user is not able to change the input tray.
Page 16 The Instruction box at the top of the window will indicate any action you must take regarding measurement readings. Imation Corp. ©2001 52-0001-4320-7, Rev. B...
Page 17 You may now calibrate another media." Click on OK to return to the calibration window. 5. Click OK to exit out of each dialog box. 6. Close delivery with Field Work Scheduling System (FWSS). Hardware installation is complete. Imation Corp. ©2001 52-0001-4320-7, Rev. B...
Page 18: Spectrocam Tips And Troubleshooting
• Listen for the flashlamp before you move off the first patch. Sometimes there is a slight delay before it begins to measure. • Reading patches too rapidly is a common error. Scanning one row should take about 6 to 8 seconds. Imation Corp. ©2001 52-0001-4320-7, Rev. B...
Page 19: System Troubleshooting
• Make sure the Imation Matchprint™ Professional Server is powered on. • If both systems are on and the Imation server is still not responding correctly, power off then power on the DocuColor 12 copier. Then power off and power on the Imation server.
Page 20: How To Replace The Battery
The customer agrees to abide by such disposal requirements as may exist in their jurisdiction and to indemnify Imation Corp. for any failure to do so Imation Corp. ©2001 52-0001-4320-7, Rev. B...
Page 21 Hardware Installation and Startup Procedure Warning Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer’s instructions. Imation Corp. ©2001 52-0001-4320-7, Rev. B...