Table of Contents
Advertisement
Installation
Operation
(Cont...)
• Suggested ambient temperatures: Choose a well ventilated area for the wine chiller with
temperatures above 16°C and below 32°C. Ambient temperatures above or below this range
may affect the performance of the unit.
• Settling: Before connecting the wine chiller to the power source, let it stand upright for
approximately 4 hours. This will allow any refrigerant gasses that may have been disturbed
during the transportation process to settle and reduce the possibility of a malfunction in the
cooling system from handling during transport.
• Electrical connection: Plug the wine chiller into a dedicated, properly installed wall outlet. Do
not under any circumstances cut or remove the third (earth) prong from the power cord. Any
questions concerning power and/or earthing should be directed toward a licensed electrician
or our after sales support centre.
• After plugging the wine chiller in, turn the unit on and allow it to cool down for 3–4 hours
before placing wine bottles or beverages in the appliance.
FIRST USE
• Powering on: Press and hold the POWER button for three seconds to turn the appliance on.
• First cooling down: When you first switch on the wine chiller, the compressor will run
continuously until the wine chiller reaches the set temperature. During this period of time, try
not to open the door frequently or place bottles inside the appliance. After about 3–4 hours,
you can start loading the wine chiller.
• Odour: You may notice an odour when you first switch on the wine chiller. This is due to the
parts being new and is no cause for concern. The odour will subside as the wine chiller starts
to cool.
IMPORTANT
• When you use the wine chiller for the first time or restart it after it has been turned off for a
long time, there could be a few degrees variance between the temperature you select and the
one indicated on the LED display. This is normal and it is due to the length of activation time.
Once the wine chiller has been running for a few hours, everything will return back to normal.
• When loading several bottles of wine at once, it will take longer for the appliance to cool the
individual bottles than when adding a bottle at a time.
• If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting the
wine chiller or reconnecting it to your mains supply.
TEMPERATURE CONTROL
This wine chiller enables you to store your wine in a stable temperature environment and free
from light exposure and vibrations. These are most important factors when it comes to storing
wine. A stable, temperature-appropriate environment will help maintain the quality of your wine
and prevent spoilage.
• Selecting the right temperature: You can store your wine at the most appropriate serving
temperature (see the table below). Set the temperature according to the type of wine that is
mostly stored in the wine chiller.
08
Advertisement
Table of Contents
