Table of Contents
Advertisement
Live Preview Introduction
Button
Zoom In
--
--
Camera Info
The single channel amplification interface is as shown below. Press and drag the blue box to
select the zoom in area. Click
to select other cameras for amplification. Click "Back" to return to the live preview interface.
5.2 Preview Mode
5.2.1 Preview By Display Mode
Set different screen modes and cameras' display sequences as required and then save the
display modes classified by surveillance areas, priorities and so on. Refer to the picture below.
Double click one display mode in the display mode list to view the live images in this mode.
Menu List
Click it to go to single channel amplification interface.
Click it to go to image adjustment interface. Refer to 5.3.5 Image
Adjustment for details.
Click it to view the IP camera information.
/
Meaning
to zoom the image. Click the camera selection box
29
DVR User Manual
Advertisement
Table of Contents
