Timer Operation - COMFORT-AIRE Century VMH09 SU Series Manual

VMH 09/12/18/24 SU/30 SD Remote Controller
ON/OFF
SILENCE
FP
TIMER
MODE
ON
TEMP
TIMER
FAN
OFF
SWING DIRECT
SLEEP
TURBO SELF
LED FOLLOW
CLEAN
ME
Remote Controller Manual - VMH 09/12/18/24 SU Series

Timer operation

Pressing the TIMER ON button will set the auto-
on time of the unit. Press the TIMER OFF
button to set the auto-off time of the unit.
To set the Auto-on time.
1. Press the TIMER ON button. The remote
controller shows TIMER ON, the last Auto-on
setting time and the signal "H" will be shown on
the LCD display area. Now it is ready to reset
the Auto-on time to START the operation.
2. Push the TIMER ON button again to set desired
Auto-on time. Each time you press the button,
the time increases by half an hour between 0
and 10 hours and by one hour between 10 and
1
24 hours.
3. After setting the TIMER ON ,there will be a one
2
second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the
signal "h" will disappear and the set temperature
will re-appear on the LCD display window.
To set the Auto-off time.
1. Press the TIMER OFF button. The remote
controller shows TIMER OFF, the last Auto-off
setting time and the signal "H" will be shown on
the LCD display area. Now it is ready to reset
the Auto-off time to stop the operation.
2. Push the TIMER OFF button again to set
desired Auto-off time. Each time you press the
button, the time increases by half an hour
between 0 and 10 hours and by one hour
between 10 and 24 hours.
3. After setting the TIMER OFF ,there will be a
one second delay before the remote controller
transmits the signal to the air conditioner. Then,
after approximately another 2 seconds, the
signal "H " will disappear and the set temperature
will re-appear on the LCD display window.
9
9
Heat Controller