Page 2
Operations Manual Below is a list of parts you will need to install an ITD1598 Adjustable Trash Can/ Bucket Mount. Mounting hardware is NOT included with product. Recommended Mounting Hardware (4) 1/4” Bolts or Rivets ( Length varies due to mounting location ) (4) 1/4”...
Page 3
Operations Manual WARNING Read all safety warnings & instructions carefully before mounting or operating your mount 1. Find Mounting Location Place the Trash Can or Bucket on desired location. Make sure mount is installed in a safe location to prevent secondary damage in the event of an accident. ITD recommends only using ITD Trash Cans. 2.
Page 4
Mark the mount hole locations of the ITD1598 Drill 1/4” holes on the mount locations Adjustable Trash Can/ Bucket Mount 4. Mount the ITD1598 Adjustable Trash Can/ Bucket Mount Mount the ITD1598 Adjustable Trash Can/ Bucket Mount with the recommended hardware.