Temperature sensor TM45x1 1 Preliminary note You will find instructions, technical data, approvals and further information using the QR code on the unit / packaging or at www.ifm.com. 1.1 Symbols used Requirement Instructions Reaction, result [...] Designation of keys, buttons or indications...
TM45x1 Temperature sensor 3 Intended use The unit detects the medium temperature of liquid and gaseous media. 4 Installation CAUTION During installation or in case of mechanical failure, high pressure or hot media can leak from the system. w Risk of injury caused by pressure or burns. u Ensure that the system is free of pressure during installation.
Temperature sensor TM45x1 Welding operation: Fig. 1: Applying the fixing points Fig. 2: Applying the welding seams u Apply the fixing points of the welding thermowell at equal distance (crosswise) with a sufficient adhesive force. u Apply the welding seams between the fixing points opposite each other. u Ensure sufficient intervals between the individual welding operations to avoid glowing through or warping of the welding thermowell due to overheating.