Table of Contents
Advertisement
Quick Links
R
R
C
C
By selecting this VC product you have chosen a professional
device, which guarantees highest possible quality and
Please read the following instructions carefully before
comissioning the product in order to be able to t ake full
advantage of all quality features regarding this product line.
Änderungen in Technik, Design und Ausstattung vorbehalten
Installations- und Betriebsanleitung
Mounting and Operating Manual
Dear Customer!
reliability.
Art.no. 168
Art.no. 168
Art.no. 168
Art.no. 168
Art.no. 168
Art.no. 168
All contents of this document may change without prior notice
©
MO_168
ecorder
/
.0 .201
MO_14511-K
Advertisement
Table of Contents
Summary of Contents for VC Videocomponents 16825-4/1
- Page 1 Installations- und Betriebsanleitung Mounting and Operating Manual Dear Customer! By selecting this VC product you have chosen a professional device, which guarantees highest possible quality and reliability. Please read the following instructions carefully before comissioning the product in order to be able to t ake full advantage of all quality features regarding this product line.
- Page 2 USER MANUAL...
-
Page 3: Table Of Contents
USER MANUAL Contents SAFETY INSTRUCTION ....................3 CHAPTER 1 PRODUCT OVERVIEW ..............1 .........................1 EAR ANEL ) ..............2 EMOTE ONTROLLER OR EFERENCE CHAPTER 2 DVR INSTALLATION & CONNECTION .......... 3 .......................3 NSTALLATION ....................4 ONNECTION IAGRAM ..................4 ... - Page 4 USER MANUAL 5.6.1 Motion ......................33 5.6.2 Alarm .......................34 5.6.3 PTZ Linkage ......................36 ...................37 5.7 R & B ECORD EARCH ACKUP 5.7.1 General ......................37 5.7.2 Events.......................38 5.7.3 Picture......................39 5.7.4 Playback Video Recordings................41 5.7.4.3 Time Frame....................43 5.7.4.4 Sub‐periods Playback..................44 5.7.5 Play Backup Files....................45 ........................48 5.8 D EVICE 5.8.1 HDD........................48 5.8.2 S.M.A.R.T......................49 5.8.3 PTZ Setup & Control ..................49 5.8.3.1 PTZ control....................51 5.8.4 Cloud Storage....................52 ........................54 5.9 S YSTEM 5.9.1 General ......................54 5.9.2 DST ........................55 ...
-
Page 5: Safety Instruction
USER MANUAL SAFETY INSTRUCTION Please carefully read the following safety instruction so as to avoid personal injuries and prevent the equipment and other connection devices from being damaged. 1. Power sources (note: please use the power supply attached or specified by the manufacturer) Never operate the equipment by using unspecified power supply. -
Page 6: Chapter 1 Product Overview
Chapter 1 Product Overview 1.1 Rear Panel Item Description VIDEO INPUT Connect with video input devices, standard BNC port AUDIO INPUT Connect with audio input signals, RCA port AUDIO OUTPUT Audio signal output, RCA port USB port Connect the supplied mouse or USB flash memory Connect to your TV or a monitor with VGA input. HDMI Connect to your digital TV or monitor with HDMI input Connect to your home network... -
Page 7: Remote Controller (For Reference Only)
USER MANUAL 1.2Remote Controller (For Reference Only) Icon Description Numeric keys Press to display channel 1~8 Numeric keys 9、0 Press to display all channels Multiple display mode Menu Press to enter or exit the Main Menu Mute Mute On/off Submenu Go to submenu Up arrow key;... -
Page 8: Chapter 2 Dvr Installation & Connection
USER MANUAL Chapter 2 DVR Installation & Connection 2.1 HDD Installation Depending on the package you have purchased, the hard disk drive may be included in the full package. If it is not pre-installed, follow the installation instructions on this user manual. Caution: DO NOT install or remove the hard disk drive while the device power is turned ON. -
Page 9: Connection Diagram
USER MANUAL 2.2 Connection Diagram Note: Above diagram is for reference only. The practical connection may be different depending on the DVR you purchased. 2.3 Power Supply Connection Caution: Use only the supplied power adapter that came with the DVR Connect one end of the power adapter to the power connector on the back of the DVR. -
Page 10: Chapter 3Dvr Common Operations
USER MANUAL Chapter 3DVR Common Operations 3.1Using the Supplied Mouse Left Button of Mouse Right Button of Mouse Click onceto choose an item in the menus and confirm your Click once to open the pop-up selection. menu on the Live Viewing screen and toexit from the Click onceupon a channel on Live Viewing screen to open menus. -
Page 11: Startup Wizard
USER MANUAL 4.1 Startup Wizard After DVR startup is completed, the Startup Wizard will be displayed. Wizard setting menu includes: Homepage, HDD Management, Network Configuration, Email Configuration, IPC Setup, Record Schedule and General System Configuration. 1) Homepage and HDD Management You can click “Cancel”... - Page 12 USER MANUAL This menu allows you to configure network parameters, such as PPPoE, DHCP, Static, and 3G. The most common types are DHCP or Static. Most probably your network type is DHCP, unless the network is manually addressed (usually called- Static). If you need an authentication user name and password to the Internet, then choose PPPoE.
- Page 13 USER MANUAL This menu allows you to add and modify IP cameras configurations. 5) Record Schedule This menu allows you to specify when the DVR records video and define the recording mode for each channel. The recording schedule lets you set up a schedule like, daily and hourly by Normal (continuous) recording, Motion recording, and Alarm recording.
-
Page 14: Live Viewing Screen
USER MANUAL This menu allows you to configure the general parameters of the system, such as Date, Time, Date Format, Time Format, Language, Menu Timeouts, Mode. 4.2 Live Viewing Screen System Date & Time Camera Title Status Icons Camera Quick Toolbar Pop-up Menu Bar System Date &... - Page 15 USER MANUAL To display current system date & time Camera Title To display the camera title A-: This indicates that the cameraconnected is an AHD camera T-: This indicates that the cameraconnected is a TVI camera C-: This indicates that the cameraconnected is a CVI camera IP: This indicates that the cameraconnected is an IP camera Status Icons This indicates that the DVR is currently recording.
-
Page 16: Chapter 5 Dvr Menu
USER MANUAL Click to switch to different camera views Click to view more layout options Click to switch all IP channels to mainstream orsubstream (for live view resolution) Click to switch among real‐time, balanced, or smooth view. The view effect modes influence only the displayed video quality by bit rate and frame rate but do not influence the recording quality. Click to start viewing channels in a sequence. Click to adjust the volume Click this to start / stop cruise for a PTZ camera Click to playback videos Click to view systeminformation Chapter 5 DVR Menu 5.1 Overview A: Alarm– To set the motion detection function and/or I/O alarm function ‐ To configure the DVR’s access parameters to the network, configure email settings, Network DDNS parameters, etc. – Image capture configuration Capture – To configure the recording options and set the recording schedule Record – To configure how many channels are displayed on the Live Viewing screen, for example Display color setup, video output resolution, privacy areas, etc. ... -
Page 17: Display
USER MANUAL – To search for recordings, events, and captured images Record Search – HDD Management, set the PTZ configuration parameters, and connection parameters to Device link your DVR to your Dropbox account. ‐ To modify general DVR settings, such as date and time, User management, view system System info, etc. – Advanced settings, for example load default, Firmware update, etc. Advanced J: Shutdown‐ To shut down or reboot the DVR K: Copy (Parameters) To‐ Click to copy the current settings to all channels or one specific channel L: Default ‐ To restore the default settings M: Save‐ Click to save the modifications N: Cancel ‐ Click to discard the modifications 5.2 Display 5.2.1 Analog Channels Channel: Display channel identification. Name: Display the channel name. Channel State: Display the channel status. Channel: Click on the checkbox next to the channel identifier to enable or disable the Analog analog channel. -
Page 18: Ip Channels
USER MANUAL 5.2.2. IP Channels This DVR supports to connect IP camera inputs. In this menu, you can add, edit or delete the IP cameras. Camera(s): Click to reassign an IP address to the IP camera that is already Auto Assign IP to connected to the DVR. - Page 19 USER MANUAL Added IP Camera List In the Added IP Camera List, you can view the IP Camera Channel title, Delete IP Camera, Edit IP Camera, Check the connection State, view the IP address/Domain / Subnet Mask / Port, view the Manufacturerof the added IP cameras, view the Device Type, check the Protocol,MAC Address&Software version of IP cameras.
-
Page 20: Live
USER MANUAL 5.2.3. Live This menu allows you to configure channel parameters. Channel: Select the channel you want to modify. Name: Enter the name of the channel. Channel Name: Enable to display the channel name on the live screen. Show Time: Disable if you do not want to see the recording time on the channel. -
Page 21: Output
USER MANUAL 5.2.4. Output This menu allows you to configure video output parameters Output: This is the monitor that you use for live view display. Video Mode: Choose your favorite layout from the drop-down menu for viewing channels in a Sequence sequence on live view. - Page 22 USER MANUAL Channel: Select the channel you want to modify. Mode: Select the desired built-in filter switch-over mode to ensure the camera works IR-CUT properly both in the daylight and night. Delay: Set the IR-CUT switching time delay. IR-CUT Flip: Check to enable automatic lens flip and/or angle flip. Lens Flip/Angle Trad: Set the flip angle.
-
Page 23: Private Zone
USER MANUAL 5.2.6 Private Zone This menu allows you to create Privacy Zone(s) if you want to partially cover up part of the image. You can create up to four privacy zones in any size and location on the channel view. These zone(s) appear as “red box rectangle areas”. -
Page 24: Record
USER MANUAL 5.3 Record 5.3.1 Record This menu allows you to configure the channel recording parameters. Channel: Select the channel to set its recording parameters. Switch: Enable in order to allow the video to be recorded to the HDD. Record Mode: Choose the recording resolution. -
Page 25: Record Schedule
USER MANUAL 5.3.2 Record Schedule This menu allows you to specify when the DVR records video and define the recording mode for each channel. The recording schedule lets you set up a schedule like, daily and hourly by normal (continuous) recording, motion recording, and alarm recording. To set the recording mode, click first on the mode radio button (Normal, Motion, or Alarm), then drag the cursor to mark the slots. - Page 26 USER MANUAL Channel: Select the channel to configure recording related information. Resolution: This parameter defines, how large the recorded image will be. FPS: This parameter defines the number of frames per second the DVR will record. Control: Select the bitrate level based on the complexity of the scene. For a simple Bitrate scene,such as a gray wall is suitable constant bitrate (CBR).
-
Page 27: 3Substream
USER MANUAL 5.3.3Substream This menu allows you to configure the settings of a particular channel if the channel is being viewed via remote access, for example Web Client. Channel: Choose the channel where the settings are applied. Resolution: Set the resolution. FPS: This parameter defines the number of frames per second at the remote session. -
Page 28: 4Mobile Stream
USER MANUAL 5.3.4Mobile stream This menu allows you to configure the settings of a particular channel if the channel is being viewed via mobiledevices. Channel: Choose the channel where the settings are applied. Enable: Enable to allow to use mobile streaming on this channel Resolution: Set the resolution. -
Page 29: Capture
USER MANUAL 5.4 Capture This menu allows you to configure the snapshot capturing parameters. Channel: Select the channel to set its capture parameters. Capture: Enable or disable automatic capturing on the channel. When this feature is enabled, Auto you can select the snapshot capturing interval. Mode: Select the image resolution. - Page 30 USER MANUAL Capture Schedule Channel: Select the channel to set its snapshot capturing schedule. Normal: When the time slot is marked green, this indicates the channel is capturing snapshots based on the Normal Interval. Motion: When the time slot is marked yellow, this indicates the channel is capturing snapshots based on Alarm Interval only when a motion is detected.
-
Page 31: Network
USER MANUAL 5.5 Network This menu allows you to configure Network parameters, E-mail setup, DDNS, RTSP & FTP. 5.5.1 Network This menu allows you to configure network parameters, such as PPPoE, DHCP, Static, and 3G. The most common types are DHCP or Static. Most probably your network type is DHCP, unless the network is manually addressed (usually called- Static). - Page 32 USER MANUAL 3G: Prior using the mobile network, you need to connect a 3G dongle to the DVR. Port: This is the port that you will use to log in remotely to the DVR (e.g. using the Web HTTP Client). If the default port 80 is already taken by other applications, please change it. Port: This is the port that the DVR will use to send information through.
-
Page 33: E-Mail
USER MANUAL 5.5.2 E-mail This menu allows you to configure email settings. Please complete these settings if you want to receive the system notifications on your email when a motion is detected, HDD becomes full, HDD is in error state, or Video Loss occurs. Email: Enable this feature. -
Page 34: E-Mail Schedule
USER MANUAL To make sure all settings are correct, click Test Email. The system sends an automated email message to your inbox. If you received the test email, it means the configuration parameters are correct. 5.5.3 E-mail Schedule The color codes on email schedule have the following meanings: Green: Slot for Motion. -
Page 35: Rtsp
USER MANUAL DDNS: Enable the DDNS service. Server: Select the preferred DDNS server (DDNS_3322, DYNDNS, NO_IP, CHANGEIP, DNSEXIT). Domain: Enter the domain name you created on the DDNS service provider’s web page. This will be the address you type in the URL box when you want to connect remotely to the DVR via PC. Fox example: dvr.no-ip.org. - Page 36 USER MANUAL Enable: Enable/Disable RTSP Verify: Enable/Disable Port: Default is554, if the default port 554 is already taken by other applications, please RTSP change it. Channel: rtsp://IP:Port/chA/B Analog A: 01(ch1), 02(ch2)….16(ch16) B: 0(main stream), 1(sub stream) For example, the DVR IP address is 192.168.1.120, and you want to view CH1 with mainstream, then the RTSP address will be: rtsp://192.168.1.120:554/ch1/0...
-
Page 37: Ftp
USER MANUAL Note: RTSP user name and password is same with DVR user name, password and permissions. Follow the instruction to input IP and port to preview video. 5.5.6 FTP This menu allows you to enable FTP function to view and load captured snapshots from DVR to your storage device over FTP. -
Page 38: Alarm
USER MANUAL FTP: Click to test the FTP settings. Test 5.6 Alarm In these section, you can configure the Motion Detection, I/O Alarm & PTZ Linkage. 5.6.1 Motion This menu allows you to configure motion parameters. The motion detection is pretty straight forward, the DVR simply compares one frame to another. -
Page 39: Alarm
USER MANUAL Sensitivity: Set the sensitivity level. Area: To setup motion area, click Setup. By default, the whole screen is marked for motion detection (red blocks). If you want to disable the motion detection on an area, you need to click the grid cursor and then drag the mouse to highlight the scope to unmark the area (transparent block). - Page 40 USER MANUAL In: User may set four groups of alarm inputs Alarm Type: There are 3 types for your choice: Normally-Open, Normally-Close, and OFF. Choose Alarm the one to match your sensor type, or Choose OFF to close the sensor trigger function. Time: you can set how long the buzzer will sound when external sensor is triggered (10s, Latch 20s, 40s, and 60s).
-
Page 41: Ptz Linkage
USER MANUAL 5.6.3 PTZ Linkage If you had connect the PTZ cameras, you can set the linkage between PTZ cameras and Motion Alarm and/or external I/O sensor alarm. With the linkage function, you can turn your PTZ cameras focus to the preset point when a motion or I/O alarm happens. Channel: Select the channel to set. -
Page 42: Record Search& Backup
USER MANUAL 5.7 Record Search& Backup This section allows you to search and playback the recorded videos based on recording type, channel, date and time parameters. You can also view and backup events and captured images. 5.7.1 General 1)Select the channel & the recording type (All / Normal / Alarm (including preset point& IO) / Motion / IO / Manual). -
Page 43: Events
USER MANUAL 5.7.2 Events This section is used to check the recording file lists and make backup. Select the recording Date&Time. Select the Channel and Type (All / Normal / Alarm (including Motion & IO) / Motion / IO). Click Search. If you want to make backup for all recording files you had searched, click Quick Backup. -
Page 44: Picture
USER MANUAL Note: Please make sure you have inserted your USB flash device to the DVR USB port before you want to make backup. If you want to Lock the recoding files, tick the checkbox after the files. The locked files will be protected and unable to be overwritten if you had enable the HDD Overwrite function. - Page 45 USER MANUAL If you want to view a captured picture, please double click a picture from the list, the system view turn to picture play mode. Right click your mouse to exit the play mode. Backward Play, click again to pause Forward Play, click again to pause Move to previous page Move to next page...
-
Page 46: Playback Video Recordings
USER MANUAL 5.7.4 Playback Video Recordings ○ ○ ○ ○ ○ ○ ○ ○ ○ 1. Recording Calendar: Dates marked with orange triangles have recordings. 2. Playback Type: Select the playback type among General, Events, Picture &Sub-periods 3. Channels: Check the channels to playback. 4. - Page 47 USER MANUAL 5.7.4.1 Smart Search Use this function to find motion of a specific area inside recording. It supports to search a single channel every time. 1. Select a channel to playback in full screen. 2. Click the smart search icon , the system will enlarge the channel into full screen and display the smart search quick toolbar.
-
Page 48: Time Frame
USER MANUAL 5.7.4.2 Trim Video Use this function if you need to backup just a certain section of the video recording. 1) Connect a USB flash drive to the DVR. 2) Double-click on the channel (to display in full screen during video playback) that you wish to backup. -
Page 49: Sub-Periods Playback
USER MANUAL You can shorten the time bar to be displayed in 2 Hours, 1 Hour or 30 Minutes in order to make an accurate position to the time bar. 5.7.4.4 Sub-periods Playback This function will allow you to divide a recording video into average separate segments and play together in the same screen. -
Page 50: Play Backup Files
USER MANUAL 5.7.5 Play Backup Files This section will help you to play the backup files. 1) Install the Video_Player software in the CD and run. 2) Copy the backup files to your computer. 3) Click “+” or “Open File” button to add files. It supports to play rf, avi, mp4, 264 & 265 files. Function Description:... - Page 51 USER MANUAL Play: Click to play file Pause: Click to pause. Stop: Click to stop playback. Frame Forward: step forward by frame Slow forward : Click to play at 8x,4x,2x,1x,1/2,1/4,1/8,1/16 speed. Fast forward : Click to play at 16x,8x,4x,2x,1x,1/2x,1/4x,1/8x speed Open file/Open Directory Expand/pack up the list.
- Page 52 USER MANUAL Basic Settings: Set on-top mode Capture Settings: Set the path to save images...
-
Page 53: Device
USER MANUAL 5.8 Device In this section, you can configure the internal HDD, PTZ setup & Cloud storage. 5.8.1 HDD This menu allows you to check & configure the internal HDD that the DVR uses for saving the recordings. You need to format the HDD only at the first startup and if you replace the HDD. HDD: Select the HDD you want to format and then click Format HDD. -
Page 54: S.m.a.r.t
USER MANUAL 5.8.2 S.M.A.R.T This function will help to check the HDD health. Please note that due to the system limitation, your DVR may not have this function. If you want to continue to use the HDD if S.M.A.R.T self-check find an exception, tick the item “Self-check not passed, continue to use the HDD”. - Page 55 USER MANUAL Channel: Choose a channel where is connected a dome camera. Protocol: Choose the communication protocol between the PTZ capable camera and DVR. If your camera support UTC (Up the Coax) function, you can choose COAX1 or 2 to display your camera OSD menu or control the UTC PTZ function.
-
Page 56: Ptz Control
USER MANUAL 5.8.3.1 PTZ control After finishing the PTZ setup, you can use the PTZ function to control your PTZ camera. 1) Left click your mouse upon a channel on Live Viewing screen to open Camera Quick Toolbar, and click the PTZ control icon 2) PTZ control panel will be displayed. -
Page 57: Cloud Storage
USER MANUAL You can add up to 255 preset points for the DVR. However, the actual preset quantity varies depending on the PTZ camera performance. 5.8.4 Cloud Storage This menu allows you to see what is happening on your camera site anytime, anywhere through the Internet. - Page 58 USER MANUAL Storage: Click to upgrade the current cloud storage service Upgrade Cloud Process to start uploading the snapshots 1) Enable Storageand configure Cloud settings for channel(s). Cloud 2) Configure advanced e-mail settings in Advanced E-mail Setup. 3) Click Cloudand wait for the verification email. Activate 4) Click Dropboxlink on verification email.
-
Page 59: System
USER MANUAL 5.9 System You are able to configure general parameters of the system, such as date and time, OSD language, menu timeouts, DST, NTP, User Management, check system information & system log here. 5.9.1 General Date/Time: Enter the date and time manually. NOTE: For date/time automation over the Internet, enable NTP. -
Page 60: Dst
USER MANUAL 5.9.2 DST DST stands for Daylight Savings Time. DST: Enable if Daylight Saving Time (DST) is observed in your region Offset: Select the amount of time to offset for DST Time Time: Choose to set the daylight saving time in weeks or in days Daylight Saving Time: Set the start time and end time for daylight saving Start Time/End... -
Page 61: Users
USER MANUAL Zone: Select the Time Zone in your location. Time Time: Click here to update the system date and time immediately. Update Note: When NTP function is enabled, system will update the system time at 00:07:50 every day, or every time when the system is started up. -
Page 62: Info
USER MANUAL Permission: To modify user access permissions, click on the user account you wish to modify, then click Permission. The user in Admin level has all permissions to the system. After modify the permissions, click to save the modifications. Save 5.9.5 Info This menu allows you to view the summary of the system, channel information &... -
Page 63: Log
USER MANUAL Name: Enter the desired name for your DVR. The name can include both letters and Device numbers. ID: Enter the desired ID for your DVR. The device ID is used to identify the DVR, and can Device only be composed of numbers, and cannot be the same with other IDs when multiple DVRs are connected in the same network. -
Page 64: Advanced
USER MANUAL Time: Specify the start and end date/time of the logs you want to review and/or Start Time/End save on an external USB storage device. Click Search. The logs will be listed on the table. 5.10 Advanced This menu allows you to configure automatic system maintenance, load factory defaults, update the firmware settings, upgrade the IPC, etc. -
Page 65: Events
USER MANUAL IPC: To reboot IP cameras. Reboot Upgrade: To upgrade IP cameras firmware. Some IP cameras may not support this feature. 5.10.2 Events This menu allows you to set the type of events that you want the DVR to inform you. Type: Select the event type. -
Page 66: Shutdown
USER MANUAL 5.11 Shutdown Manually turn off or reboot the DVR. You will need to input your user name and password to complete the operation. -
Page 67: Chapter 6 Remote Access Via Web Client
USER MANUAL Chapter 6 Remote Access via Web Client Use the Web Client to remotely access your DVR at any time via a PC. Before you access the Web Client, you need to ensure that the network settings of the DVR are configured properly. The most convenient and easiest way is if you have set the DVR a static IP address (please see “5.5.1 Network”). - Page 68 USER MANUAL 2) For the first time you run the web client, system will require to install the web client plugin. Click download to download the plugin and install to your computer. 3)After installing the plug-in, close & launch again your browser and repeat step 1 to open the login page.
- Page 69 USER MANUAL For Mac SAFARI: 1) Launch the Safari on your Mac, and enter the DVR static IP address or DDNS domain name (Host Name) you have set on DVR in the URL box. 2) Download the plug-in "SurveillanceClient.dmg", locate the downloaded file and double click it. 3) Click on "Continue"...
-
Page 70: Web Client Manager
USER MANUAL 6.2 Web Client Manager The web client supports to full control the DVR with administrator account. Please make sure to protect your user name & password for preventing illegal login. 6.2.1 Live Interface This is the first screen that opens after you have logged in to the Web Client. Here you can open or close live preview, record video to local computer manually, take snapshots of the screens, PTZ control, color adjustment, etc. - Page 71 USER MANUAL ：Close all the Live channels : Switch display mode in channel window : Open the images on Live window. : Stretch. : Original proportions. : Click to maximize the current window to full screen. Right click to popup menu option and select Exit Full Screen.
-
Page 72: Playback
USER MANUAL 3. PTZ Control ：PTZ direction control and automatic scanning button ： PTZ movement speed adjustment ：Adjust the zoom +, - ：Adjust FOCUS +, - ：Adjust the IRIS +, - ：Set, clear and jumppoints ：Start cruising and stop cruising 6.3.2 Playback You can search &... - Page 73 USER MANUAL 1. Record Search Record playback procedure Firstly, select the date you want to check and tick 1 to 4 channels. Any record files in current channel at current date will be displayed in the status bar of the interface. Secondly, select record type (Normal record, Alarm record and All) and channels, and then click “...
- Page 74 USER MANUAL Click to start record playback. When mouse curse is moving on the time axis, the time point of current position will be displayed on the time axis screen. Click to locate the record. Click the icon to zoom in/out the time bar display ratio. Sub-stream playback "Stream"...
- Page 75 USER MANUAL After opening playback, click icon to clip the selected file; and click again to stop the clip function. Then playback clip is successfully done. Record clip file will be saved as *.264 format. Snapshot function Move the mouse curse to the channel you want to capture, and click [] icon to capture the live images remotely.
-
Page 76: Remote Setting
USER MANUAL 6.3.3 Remote Setting Here you can remotely configure the settings of the DVR. Please see “Chapter 5 DVR Menu” for more information. 6.3.4 Local Setting Record Path: Set the path to save manual recordings on your PC’s local drive. Download Path: Set the path on your PC’s local drive where you want to download recordings from the DVR. -
Page 77: Chapter 7 Appendix
USER MANUAL Save: Click Save to save the modifications. File Type: Choose your preferred file type for manual recordings. Interval: Determine the maximum length of manual recordings. Chapter 7 Appendix 7.1 Troubleshooting Q: What can I do if the system does not detect the HDD? English-19 A: Check if the power supply system is properly connected and data cord and power cables are securely connected, and if something wrong with the HDD interface. -
Page 78: Usage Maintenance
USER MANUAL A: Please check if the data line connection for HDD is OK and system time is properly adjusted. Try a few times and restart. If it still doesn’t work, check if the HDD is broken. 11. Q: Why DVR cannot control PTZ? A: Please check if: PTZ in the front side is malfunctioned. -
Page 79: Accessories (For Reference Only)
USER MANUAL the network cable is frequently plugged, it is suggested to replace connecting line regularly, or the input signal may be unstable. 7. This is a class A product. It maybe bring wireless interference in life. Under this situation, it need user to make measures. - Page 80 USER MANUAL The material in this document is the intellectual property of our department . No part of this manual be reproduced, copied, translated, transmitted, or published in any form or by any means without our department prior written permission. Our products are under continual improvement and we reserve the right to make changes without noti ce.
- Page 83 Installations- und Betriebsanleitung Your local distributor All contents of this document may change without prior notice All rights are reserved. MO_14511-K Änderungen in Technik, Design und Ausstattung vorbehalten...