Timer Function; For The Protection Of Being Recorded - Samsung MAX-DN85 Instruction Manual

Timer Function

The timer enables you to switch the system on or off at spe-
cific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off auto-
matically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing On/Standby.
2
Press Timer/Clock until TIMER is displayed.
3
Press Enter.
Result: ON TIME is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
4
Set the timer switch-on time.
a Set the hour by tuning the Multi Jog knob to the right or to the left.
b Press Enter.
Result: The minutes flash.
c Set the minutes by tuning the Multi Jog knob to the right or to
the left.
d Press Enter.
Result: OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
5
Set the timer switch-off time.
a Set the hour by tuning the Multi Jog knob to the right or to the left.
b Press Enter.
Result: The minutes flash.
c Set the minutes by tuning the Multi Jog knob to the right or to
the left.
d Press Enter.
Result: VOL XX is displayed, where XX corresponds to the vol-
ume already set.
6
Press Tuning Down and Up to adjust the volume level and press
Enter.
Result: The source to be selected is displayed.
7
Turn the Multi Jog knob to select the source to be played when the
system switches on.
If you select... You must also...
TAPE (cassette) Insert a recorded cassette in one of the
decks before setting the system to standby.
TUNER (radio) a Press
b Select a preset station by tuning the
CD (compact disc) Load one or more compact discs.
8
Press Enter to confirm the timer.
9
Press On/Standby to set the system to standby mode.
Result: is displayed to the bottom left of the time, indicating that
the timer has been set. The system will switch on and off
automatically at the required times.
If the timer switch on and off times are identical, the word ERROR is
displayed.
Enter
.
Multi Jog knob to the right or to the left.
Demo
On/Standby
Timer/
Clock
1,9
2
Display
R
RDS
PTY
6
Down Tuning Mode
Mono/ST.
Display
Counter
Reset
Enter
Deck 1/2
Phones
3,4,5,6,7,8
CD Synchro REC/Pause

For the Protection of being Recorded

Press Record Lock (recording protection) button.
When Record Lock (recording protection) lamp is lighted up
all of the buttons are not activated. (Volume, Demo key is
activated.)
It is a function that the recording stop is prevented by other
button action during recording.
Record Lock (recording protection) is activated only during
recording.
When the Record Lock is on (the lamp is on), do not open
the cassette door.
When releasing, press Record Lock button once again.
Display
R Band
DS
PTY
TUNER DVD/CD
Down Tuning Mode Up
Mono/ST.
Display
Counter
Memory REV.Mode
Reset
Enter
Deck 1/2 Dubbing
Normal High
CD Synchro REC/Pause Record Lock
Band
TUNER DVD/CD TAPE AUX
6
Up
Multi Jog
Memory REV.Mode
Dubbing
Normal High
Record Lock
4,5,7
TAPE AUX
Multi Jog
31
GB
Do
V