Silencer cover
Two bolts
Silencer
Angle transmission
Drain
screw
Plug (Bolt)
Screw
SRM-4300
Cleaning silencer
• Clean deposits from silencer and tighten two bolts.
Angle transmission
NOTE
Use good quality lithium multi grease.
• Remove the plug and drain screw from the angle transmission.
• Add grease into the transmission until old grease is pushed out.
If necessary, use a low pressure pump.
• Reinstall the drain screw and plug.
Lubricating shaft tube (SRM-4300R)
• Remove screw from shaft tube housing.
• Add machine oil.
• Reinstall screw.
20