Summary of Contents for Aewin Technologies CB-7960
- Page 1 User’s Manual Networking Control Board Model Number CB-7960 ® ® ® Intel Pentium 4(D)/Celeron (D) Networking Control Board with six GbE LAN User’s Manual Version 1.0 AEWIN Technologies Co., Ltd September, 2006...
- Page 2 For more information on CB-7960 or other AEWIN products, please visit our website http://www.aewin.com.tw. For technical supports or free catalog, please send your inquiry to info@aewin.com.tw...
-
Page 3: Table Of Contents
Chapter 4. Utility & Driver Installation ..............39 4.1 Operation System Supporting ................39 4.2 System Driver Installation ................39 4.3 VGA Driver Installation...................39 4.4 LAN Driver Installation...................41 4.5 SATA Driver Installation..................41 Appendix A: Programming the Watchdog Timer ............43 AEWIN Technologies Co., Ltd September, 2006... - Page 4 User’s Manual Appendix B: Optional Riser Card................45 Appendix C: Optional Cables ..................46 AEWIN Technologies Co., Ltd September, 2006...
-
Page 5: Chapter 1. General Information
The CB-7960 is a scalable networking control board based on Intel Pentium-4 architecture with Intel 945G and ICH7R chipsets. The CB-7960 is equipped with six GbE LAN ports, with bypass function in four ports. With good cost and performance ratio, it is suitable for SMB/Enterprise segments. -
Page 6: Order Information
CB-7960. Keep the box and carton when you probably ship or store CB-7960 in near future. After you unpack the goods, inspect and make sure the packaging is intact. Do not plug the power adapter to the main board of CB-7960 if you already find it appears damaged. -
Page 7: Precautions
Electrostatic discharge can be easily damage the CB-7960 control board. Do not remove the anti-static packing until you are ready to install the CB-7960 control board. Ground yourself before removing any system component from it protective anti-static packaging. -
Page 8: Board Layout
ICH7R ATX Power ATX Power DDR2 Socket * 2 DDR2 Socket * 2 +12V DC IN +12V DC IN SATA Connectors SATA Connectors KB/MS KB/MS 945G 945G System System Socket Socket 1.7 Board Dimension AEWIN Technologies Co., Ltd September, 2006... -
Page 9: Chapter 2. Connector/Jumper Configuration
COM2 Box Header CN24 FAN Connector CN25 FAN Connector CN26 Giga LAN RJ45 Connector CN27 Giga LAN RJ45 Connector CN28 Giga LAN RJ45 Connector CN29 Giga LAN RJ45 Connector CN30 Giga LAN RJ45 Connector AEWIN Technologies Co., Ltd September, 2006... - Page 10 User’s Manual AEWIN Technologies Co., Ltd September, 2006...
-
Page 11: Connector And Jumper Setting
KDAT MDAT Ground PS2_GND PS2_GND PS2_VCC 10 PS2_VCC Ground CN6: GPIO pin header CN11: +12V power connector Define Ground Pin Define Pin Define Ground GPO4- GPO4+ GPO5- GPO5+ +12V GPO6- GPO6+ +12V GPO7- GPO7+ AEWIN Technologies Co., Ltd September, 2006... - Page 12 RESERVED RESERVED Ground Ground 3.3VAUX Ground RST# Ground Ground 3.3V POWER GNT# REQ# GOOD 3.3V 5VSB AD{31} PME# +12V AD{29} RESERVED AD{30} CN16: Front panel header AD{27} 3.3V AD{25} AD{28} RESERVED AD{26} C/BE[3]# AD{24} AEWIN Technologies Co., Ltd September, 2006...
- Page 13 AD[00] RESERVED_WI CN19: IDE (2.54mm) 40 pin header AD[01] RESERVED_WI Define Define M66EN RESET* DATA 7 DATA 8 DATA 6 DATA 9 DATA 5 DATA 10 DATA 4 DATA 11 DATA 3 DATA 12 AEWIN Technologies Co., Ltd September, 2006...
- Page 14 DATA7 DATA8 USBVCC DATA6 DATA9 USBP1N DATA5 DATA10 USBP1P DATA4 DATA11 Ground DATA3 DATA12 Ground DATA2 DATA13 CN23: COM2 box header DATA1 DATA14 DATA0 DATA15 Ground DREQ* Ground Define Define DIOW* Ground DCD# DSR# AEWIN Technologies Co., Ltd September, 2006...
- Page 15 Ground TX0+ RXD# TX0- DSR# RX0+ RTS# CN33: USB connector RX0- LED: D1 :Bi-Color Speed LED 10 Mbps Define 100 Mbps Yellow 1000Mbps Green Data0- D2 :Link/Activity LED Data1+ Link Green Ground Activity Blinking AEWIN Technologies Co., Ltd September, 2006...
- Page 16 Hold Data (Default) Clear CMOS JP2: Compact Flash Select Setting Master Slave (Default) JP3/JP4: Bypass Always Enabled Select Setting Normal (Default) Bypass Always Enabled JP5: Watchdog or Bypass Select Setting Bypass Mode (Default) Watch Dog AEWIN Technologies Co., Ltd September, 2006...
-
Page 17: Compactflash Tm Card Socket Pin Define
DREG 14 Ground 34 IOR DACK 15 Ground 35 IOW 16 Ground 36 WE 17 Ground 37 RDY/BSY Ground 18 A02 38 VCC Ground 19 A01 39 SCSE Ground 20 A00 40 NC Ground AEWIN Technologies Co., Ltd September, 2006... -
Page 18: Chapter 3 Bios Setup
User’s Manual Chapter 3 BIOS Setup The ROM chip of your CB-7960 board is configured with a customized Basic Input/Output System (BIOS) from Phoenix-Award BIOS. The BIOS is a set of permanently recorded program routines that give the system its fundamental operational characteristics. -
Page 19: Entering The Cmos Setup Program
2. Press the <DEL> key to enter CMOS Setup program. The main menu appears: 3. Choose a setup option with the arrow keys and press <Enter>. See the following sections for a brief description of each setup option. AEWIN Technologies Co., Ltd September, 2006... -
Page 20: Menu Options
Configure the CPU speed and, if the optional system monitor IC is installed, view system information FREQUENCY / VOLTAGE CONTROL: Configure the CPU and PCI clock, if the optional system monitor IC is installed, view system information AEWIN Technologies Co., Ltd September, 2006... -
Page 21: Standard Cmos Features Setup
Abandon all CMOS changes and exit the CMOS setup program 3.4 Standard CMOS Features Setup Use the Standard CMOS Setup option as follows: 1. Choose “Standard CMOS Features” from the main menu. The following screen appears: AEWIN Technologies Co., Ltd September, 2006... -
Page 22: Advanced Bios Features Setup
<ESC> key to return to the main menu. 3.5 Advanced BIOS Features Setup Use the Advanced BIOS Features Setup option as follows: 1. Choose “Advanced BIOS Features Setup” from the main menu. following screen appears: AEWIN Technologies Co., Ltd September, 2006... - Page 23 Skip some checking items and speed up the power on process. First/Second/Third Boot The BIOS attempts to load the operating Device system from the devices in the sequence selected in these items. Choose: HDD-0, AEWIN Technologies Co., Ltd September, 2006...
- Page 24 Operation System. Select 1.1, 1.4. Default is 1.4. OS Select for DRAM > 64MB Select OS/2 if your system is using OS/2 and has a memory size of more than 64MB. Default is Non-OS2. AEWIN Technologies Co., Ltd September, 2006...
-
Page 25: Advanced Chipset Features Setup
Allow EPA logo appears during boot up. 3.6 Advanced Chipset Features Setup Use the Advanced Chipset Features Setup option as follows: 1. Choose “Advanced Chipset Features Setup” from the main menu. The following screen appears; AEWIN Technologies Co., Ltd September, 2006... - Page 26 BIOS at F0000h-FFFFFh, enhancing system performance. However, if any program writes to this memory area, a system error may result. Video BIOS Cacheable Select Enabled or Disabled. When Enable this AEWIN Technologies Co., Ltd September, 2006...
-
Page 27: Integrated Peripherals
64MB of memory is available to the graphics core, with a possibility to increase this amount to 128MB/224MB. Write protect When select Enabled, the BIOS can’t be written data. 3.7 Integrated Peripherals Use the Integrated Peripherals Setup option as follows: AEWIN Technologies Co., Ltd September, 2006... - Page 28 Onboard Serial Port 1 3F8/IRQ4、2F8/IRQ3、3E8/IRQ4、2E8/IRQ3、AUTO Onboard Serial Port 2 Onboard Parallel Port 378/IRQ7, 278/IRQ5, 3BC/IRQ7 Parallel Port Mode <SPP>, <EPP>, <ECP>, <EPP+ECP>, <Normal> EPP Mode Select <EPP1.9>, <EPP1.7> ECP Mode Use DMA <1>, <3> AEWIN Technologies Co., Ltd September, 2006...
-
Page 29: Power Management Setup
This field allows you to select the type (or degree) of power saving by changing the length of idle time that elapses before the “Suspend Mode” and “HDD Power Down” field is activated. Min Saving AEWIN Technologies Co., Ltd September, 2006... - Page 30 Primary/Secondly IDE 0/1 When the filed is enabled, the system will restart the power-saving timeout counter when the activity is detected on any drives on the primary or secondly IDE channel. FDD, COM, LPT Port When the filed is enabled, the system will restart AEWIN Technologies Co., Ltd September, 2006...
-
Page 31: Pnp/Pci Configuration
2. Move between items and select values by using the arrow keys. Modify the selected fields using the PgUP/PgDN keys. For information on the various options, please press <F1> key. Option Description AEWIN Technologies Co., Ltd September, 2006... -
Page 32: Pc Health Status Configuration Setup
3. Please press the <ESC> key to return the main menu after finishing with the PNP/PCI Configuration Setup. 3.10 PC Health Status Configuration Setup Choose “PC Health Status Configuration Setup” from the main menu, the following screen appears: AEWIN Technologies Co., Ltd September, 2006... -
Page 33: Frequency/Voltage Control
The item enabled you to set up the clock speed and system bus for your system. The clock speed and system bus are determined by the kind of processor you have installed in the system. AEWIN Technologies Co., Ltd September, 2006... -
Page 34: Load Fail-Safe Defaults
BIOS ROM. This is useful if you are having problems with the main board and need to debug or troubleshoot the system. The loaded default settings do not affect the Standard CMOS Setup screen. AEWIN Technologies Co., Ltd September, 2006... -
Page 35: Load Optimized Defaults
Standard CMOS Setup screen. To use this feature, highlight it on the main screen and press <Enter>. A line will appear on the screen asking if you want to load the Optimized Default AEWIN Technologies Co., Ltd September, 2006... -
Page 36: Supervisor/User Password
The password is case sensitive and you can use up to 8 alphanumeric characters. Press <Enter> after entering the password. At the Next Prompt, confirm the new password by typing it and pressing <Enter> again. AEWIN Technologies Co., Ltd September, 2006... -
Page 37: Save And Exit Setup
CMOS Setup program. 3.15 Save and Exit Setup This function automatically saves all CMOS values before exiting Setup. 3.16 Exit Without Saving Use this function to exit Setup without saving the CMOS value. AEWIN Technologies Co., Ltd September, 2006... - Page 38 User’s Manual AEWIN Technologies Co., Ltd September, 2006...
-
Page 39: Chapter 4. Utility & Driver Installation
CB-7960 offers the system driver in the setup CD. Please install the driver following the procedures. 4.3 VGA Driver Installation CB-7960 offers the VGA driver in the setup CD. Please click the Autorun file and AEWIN Technologies Co., Ltd September, 2006... - Page 40 User’s Manual install the driver following the procedures. AEWIN Technologies Co., Ltd September, 2006...
-
Page 41: Lan Driver Installation
User’s Manual 4.4 LAN Driver Installation CB-7960 offers the LAN driver in the setup CD. Please click the Autorun file and install the driver following the procedures. 1. Insert the setup CD of CB-7960 into your CD-ROM drive. 2. Choose the Drivers file to click the Autorun icon. - Page 42 User’s Manual AEWIN Technologies Co., Ltd September, 2006...
-
Page 43: Appendix A: Programming The Watchdog Timer
User’s Manual Appendix A: Programming the Watchdog Timer The CB-7960 provides a watchdog timer that resets the CPU or generates an interrupt if processing comes to a stop. This function ensures greater system reliability in industrial stand-alone and unmanned environments. - Page 44 7. Run Program 1 8. Run Program 2 (reload the timer interval value of 3CH, 60 seconds) 9. Run Program 1 Run Program 3 (Load the timer interval of 00H, and disable the watchdog timer function) AEWIN Technologies Co., Ltd September, 2006...
- Page 45 It needs to insert into PCI edge golden finger of the board and can be extended for two PCI slots. For testing purpose, the CB-7960 provides a VGA test card MB-06018. It can be connected to VGA pin header of the board for display use.
- Page 46 20CM/ ROHS 46L-IPS200-00 KB/MS CABLE 15CM/ RoHS CN19 46L-ATA660-00 ATA-66 CABLE 46cm/ RoHS 46L-I00IDE-00 IDE CABLE CN20 (2mm) 45cm/ RoHS CN18 46L-ILPT01-00 PRINTER CABLE (2mm) 26cm/ ROHS 46L-SATA00-00 S-ATA CABLE CN9, 10 50CM /RoHS AEWIN Technologies Co., Ltd September, 2006...
Need help?
Do you have a question about the CB-7960 and is the answer not in the manual?
Questions and answers