Page 2
Promoting Independent and Dignified Living User Manual Model CT3000 Please read this User Manual carefully before you use the device or service we provide. Please keep this document for future reference. Failure to follow the instructions may seriously affect the effectiveness of the product and damages may be caused to the device.
Page 3
Please Note Always use the power cord and adapter The TEQ-FallsAlert can be installed in any room provided with the device. This ensures that the of the house where there is access to Wi-Fi, device will work properly and remain free from including the bathroom, kitchen room, living damage.
Detects Falls the Instant they Occur Contents Specifications Cautions Inside the box Getting to know your TEQ-FallsAlert Installation Frequently Asked Questions Disclaimer 4 | USER GUIDE...
Specifications Model TEQ-FallsAlert CT3000 Detection Range Up to 7 m (23 ft) *conditions apply Horizontal Field of View 45 Degrees Installation Height 1.4 m or 2.2 m (4.5 ft or 7.2 ft) Network Interface 2.4GHz Wi-Fi Water Resistant IP54 Operating Temperature...
Inside the Box TEQ-FallsAlert Installation Bracket Power Adapter USB Cable 2x Screws 2x Rawlplugs Getting to know your TEQ-FallsAlert Status Indicators Home Button Installation Slot Type-C Adapter Port Device FRONT Device BACK Cable Clip Bracket Adhesive Side Bracket Orientation Side...
Android. Alternatively, you can search for ”Sofihub” in the Apple App Store or Google Play. Open the app, register for an account and add the TEQ-FallsAlert device to your account by following the instructions in the app.
How do I know the device is working? however accurate fall detection within 5-7 metres is When the TEQ-FallsAlert is working properly, the reduced. The most accurate fall detection is within status indicators are off. You can press the home a 5-metre radius.
Wave. TEQ-FallsAlert can monitor through glass. If there is a moving object on the other side of a glass partition or a glass door; it may cause false or missed alerts.
Need help?
Do you have a question about the TEQ-FallsAlert and is the answer not in the manual?
Questions and answers