TC Helicon GoXLR MIC, GoXLR MIC-WH - Dynamic Broadcast Microphone Manual

Features

• Professional dynamic XLR microphone
• Highly directional to capture you and not the room
• Prevent problematic Ps with built-in adjustable height pop filter
• Get the perfect mic placement with dual articulated joints
• Personalize with anodized silver/rose gold or 9 other colored rings

Switch Function

1. GoXLR MIC can attach to any standard microphone stand thread, 5/8" or 3/8" with threaded adapter.
2. Toothed pivot locks in the perfect angle while not requiring over tightening.
3. Loosen locking nut to swivel mic around base, tighten nut to lock in place.
4. To swap the color ring, remove the pop filter, unscrew the base of the mic (found around the XLR jack) and slide the mic out of the mic mount. Replace the ring with desired color and reattach to mic mount.
5. To remove or adjust the pop filter, loosen the small knob on the mic clip. Slide the filter to the desired position and tighten the knob.

Frequency Response Curve

[solid line] = 0 Degrees, [dash line] = 120 Degrees

Polar Pattern

Specifications

TC Helicon is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download TC Helicon GoXLR MIC, GoXLR MIC-WH - Dynamic Broadcast Microphone Manual