MaxiTrack Sensors 2ctemp-USB Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

I N S T R U C T I O N M A N U A L

L I N E O F

U S B T Y P E D A T A

L O G G E R S

MaxiTrack Sensors

info@maxitracksensors.com | www.maxitracksensors.com

Table of Contents

Need help?

Do you have a question about the 2ctemp-USB and is the answer not in the manual?

Questions and answers

Summary of Contents for MaxiTrack Sensors 2ctemp-USB

Page 1 I N S T R U C T I O N M A N U A L L I N E O F U S B T Y P E D A T A L O G G E R S MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 2 M O D E L S A N D T Y P E S O F S O F T W A R E A V A I L A B L E MaxiThermal-2 Software / Supported Models: 2ctemp-USB - Ref. 20.1025 MaxiLog Multiple Use MIN MAX - Ref. 20.2412 MaxiLog CRYO – Ref. 20.1100 MaxiLog Multiple Use - Ref.
Page 3 MDAS-X Software / Supported Models: 3ctemp-RH – Ref. 20.1031 MaxiLog-RH – Ref. 20.1007 MaxiLog-RH – Ref. 20.1055 (Version Single Use) ctemp-USB-80 Gen2 – Ref. 20.1026 (Version Single Use) EZ Logger Hi Temp. – Ref. 20.1033 MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 4: Table Of Contents
I N D E X INTRODUCTION.................... 04 LAYOUT - DIMENSIONS ........................05 TECHNICAL CHARACTERISTICS (2ctemp-USB) ................06 TECHNICAL CHARACTERISTICS (MaxiLog Multiple Use MIN MAX) ........09 TECHNICAL CHARACTERISTICS (Maxilog CRYO Model) ............12 TECHNICAL CHARACTERISTICS (Maxilog Multiple Use Model) .......... 15 TECHNICAL CHARACTERISTICS (3ctemp-RH) ............
Page 5: Introduction
All items in our line of Wireless Transmitters and Data Loggers can be returned to one of our manufacturing units located in the United States, Vietnam, China or Brazil. Contact our Technical Support and receive additional information. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 6 L I N E MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 7 2 C T E M P - U S B | R E F . 2 0 . 1 0 2 5 Note: The 2ctemp-USB model is compatible with the MaxiThermal-1 Software. Request the installation link from our Technical Customer Support area.
Page 8: Technical Characteristics (2Ctemp-Usb)
• File manager • Attachment note • Zoom • Time display Software MaxiThermal Elapsed or Date / Time Display recorded • Celsius, Fahrenheit or Kelvin • 3D viewing option Guarantee 6 meses Specifications subject to change without notice. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 9 5 Days 4 hours 14 min 1 minute 5 minutes 25 Days 21 hours 10 min 10 minutes 51 Days18 hours 20 min 30 minutes 155 Days 7 hours 0 min 1 hour 310 Days 14 hours 0 min Maxitrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 10 M A X I L O G M U L T I P L E U S E M I N M A X - R E F . 2 0 . 2 4 1 2 LAYOUT / Front View MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 11: Technical Characteristics (Maxilog Multiple Use Min Max)
• File manager • Attachment note • Zoom • Time display Software MaxiThermal Elapsed or Date / Time Display recorded • Celsius, Fahrenheit or Kelvin • 3D viewing option Guarantee 6 meses Specifications subject to change without notice. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 12 5 days 4 hours 14 min 1 minute 5 minutes 25 days 21 hours 10 min 10 minutes 51 days18 hours 20 min 30 minutes 155 days 7 hours 0 min 1 hour 310 days 14 hours 0 min MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 13 M A X I L O G C R Y O - R E F . 2 0 . 1 1 0 0 LAYOUT / Front View MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 14 • File manager • Attachment note • Zoom • Time display MaxiThermal software Elapsed or Date / Time Display recorded • Celsius, Fahrenheit or Kelvin • 3D viewing option Guarantee 6 months specifications subject to change without notice. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 15 5 days 4 hours 14 min 1 minute 5 minutes 25 days 21 hours 10 min 10 minutes 51 days 18 hours 20 min 30 minutes 155 days7 hours 0 min 1 hour 310 days 14 hours 0 min MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 16 LAYOUT / Front View IMPORTANT: The Data Logger Ref. 20.1080 is factory programmed for single use (Single Use / Disposable). Thus, once the START button is pressed, it will not be able to receive new programming. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 17 • File manager • Attachment note • Zoom • Time display Software MaxiThermal Elapsed or Date / Time Display recorded • Celsius, Fahrenheit or Kelvin • 3D viewing option Guarantee 6 monthrs Specifications subject to change without notice. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 18 5 days 4 hours 14 min 1 minute 5 minutes 25 days 21 hours 10 min 10 minutes 51 days 18 hours 20 min 30 minutes 155 days7 hours 0 min 1 hour 310 days 14 hours 0 min MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 19 3 C T E M P - R H – R E F . 2 0 . 1 0 3 1 LAYOUT / Front View MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 20 MAX and MIN limits Computer interface USB / Mini B port. Power supply CR2450 battery. Operating life of approx. 2 years Weight 33 grams Certificado CE Guarantee 6 monthrs Specifications subject to change without notice. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 21: Technical Characteristics (3Ctemp-Rh)
5 days 4 hours 14 min 1 minute 5 minutes 25 days 21 hours 10 min 10 minutes 51 days 18 hours 20 min 30 minutes 155 days 7 hours 0 min 1 hours 310 days 14 hours 0 min MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 22 USB interface built into the Data Logger itself. IMPORTANT: The Data Logger Ref. 20.1055 is factory programmed for single use (Single Use / Disposable). Thus, once the START button is pressed, it will not be able to receive new programming. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 23 • File manager • Attachment Software MaxiThermal2 note • Zoom • Elapsed time display or Date / Time Recorded view • Display Celsius, Fahrenheit or Kelvin • 3D viewing option Guarantee 6 monthrs Specifications subject to change without notice. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 24: Technical Characteristics (Maxilog-Rh)
30 seconds 2 days 16 hours 5 days 9 hours 1 minutes 5 minutes 27 days 1 hours 54 days 2 hours 10 minutes 30 minutes 162 days 6 hours 324 days12 hours 1 hour MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 25 E D L - R T D 2 - R E F . 2 0 . 1 0 9 9 LAYOUT / Front View MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 26 • File manager • Attachment note • Zoom • Elapsed time display Software MaxiThermal or Date / Time Recorded view • Display Celsius, Fahrenheit or Kelvin • 3D viewing option Guarantee 6 monthrs Specifications subject to change without notice. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 27 43 days 0 hour 10 min 1 minutes 5 minutes 215 days 0 hour 50 min 10 minutes 430 days 1 hour 40 min 30 minutes 1290 days 5 hours 0 min 1 hour 2580 days 10 hours 0 min MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 28 E D L - X Y Z - R E F . 2 0 . 1 1 1 0 LAYOUT / Front View MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 29 Date / Time Recorded view • Display Celsius, Fahrenheit or Kelvin • 3D viewing option Measurement data, firmware version, number of Internal Firmware series, model type. Guarantee 6 monthrs Specifications subject to change without notice. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 30: Technical Characteristics (Edl-Xyz)
43 days 0 Hr 10 min 1 minute 5 minutes 215 days 0 Hr 50 min 10 minutes 430 days 1 Hr 40 min 30 minutes 1290 days 5 Hr 0 min 1 hour 2580 days 10 horas 0 min MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 31 Interface cable and has a direct USB interface built into the Data Logger itself. IMPORTANT: The Data Logger Ref. 20.1026 is factory programmed for single use (Single Use / Disposable). Thus, once the START button is pressed, it will not be able to receive new programming. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 32: Technical Characteristics (Ctemp-Usb-80 Gen2)
Fahrenheit or Kelvin • 3D viewing option .Automatic PDF report generation (necessary to install the Software) 1xCR2450 coin battery - 3.6 V lithium with Power supply service life of approx 1 year Specifications subject to change without notice. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 33 5 days 4 hours 14 min 1 minute 5 minutes 25 days 21 hours 10 min 51 days 18 hours 20 min 10 minutes 155 days 7 hours 0 min 30 minutes 310 days 14 hours 0 min 1 hour MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 34 LAYOUT / Front View The Model ctemp-USB-80 Gen2 does not require the use of an Interface cable and has a direct USB interface built into the Data Logger itself. Before using it, read the following instructions carefully. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 35 I N S E R T I N G T H E B A T T E R Y Before using the Data Logger EZ, it is necessary to insert the battery (especially for high temperatures 3.6V 2 / 3AA), following the instructions below: MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 36 Check the EZ Logger option and click OK: The “EZ Recorder” option will appear in the Software Menu. To test the communication of the Data Logger with your computer and MDAS Software, click on “EZ Recorder” and then on the “General Information” tab. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 37 INFORMATION to check if the instrument has started recording. If the ACTIVE status appears, it means that the recordings have started. 12 - Remove the Data Logger from the USB, screw the protection cap in Stainless Steel again and insert it into your process or equipment. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 38 DUE TO ITS CYLINDRICAL FORMAT, DATA LOGGER EZ CAN EASILY ROLL ON THE TABLE, MAY FALL DOWN AND SUFFER FROM INTERNAL FAILURE. FOR THIS REASON, ALWAYS USE SHIMS AND LATCHES WHEN HANDLING IT ON THE WORKBENCH. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 39: Installation And Initial Configuration
“Silicon Laboratories”, click on “Install” 7 – With the MDAS-X Software open, insert the Data Logger EZ into your computer's USB and wait for the “Device Driver Installation” balloon to appear. FILE and click on PREFERENCES MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 40 4 – Check if a USB port is available on your computer. If you have this type of connector on your CPU or Notebook, connect the USB cable (see figure below) that comes with the Data Logger. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 41 R E C O R D I N G , A F T E R I N S T A L L I N G T H E S O F T W A R E Click on the “Logger” menu and then on “Logger Initialization”, as shown in the image below. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 42: Logger Initialization Window
3 – Logger Clock: Date and time of the data logger's internal memory 4 – Unit: unit of measurement celsius and fahrenheit 5 – Memory Configuration: option to choose between recording to the end of memory or recording with continuous memory. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 43 3 lines: MIN, MAX alarm and the line that shows the temperature variation during the recording period. 12 – No alarm: option to choose between alarm enabled or disabled. 13 – Program Unit: button to save all the settings chosen on the programming screen. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 44 L O G G E R I N I T I A L I Z A T I O N W I N D O W After filling in the data on the screen above, press the “Program Unit” button so that the software transmits the programming to the data logger, as shown below. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 45 L O G G E R I N I T I A L I Z A T I O N W I N D O W After the transmission of the programming is complete, the software will indicate the completion of the process in the LOG field. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 46 R E A D I N G A N D V I E W I N G T H E G R A P H I C R E P O R T Click on the Logger menu, then Read Logger, as shown in the image below. Choose your computer's folder and click save. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 47 R E A D I N G A N D V I E W I N G T H E G R A P H I C R E P O R T After clicking save, the message below will appear, informing you that the data file has been successfully saved on your computer, then click ok. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 48 R E P O R T After loading the Graph, follow the indication in the image below to activate / deactivate the legend. The image below shows the information present in the plot of the graph. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 49: General Information Window
G E N E R A L I N F O R M A T I O N W I N D O W To obtain a summary of the information, follow the instructions below. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 50 V I E W I N G T H E D A T A T A B L E To view the graph in the form of a data table, click on “Graph” and then on “View Data”, as shown below. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 51: Graphic Printing
G R A P H P R I N T I N G You can also print the table, as shown below, by clicking on the printer icon. Then, click the next printer icon again, as shown below. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 52 The MDAS-X Software has the ability to automatically generate PDF reports I N S T A L L A T I O N O F M D A S - X S O F T W A R E Choose the Upgrade Code option ... MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 53 I N S T A L L A T I O N O F M D A S - X S O F T W A R E Enter the software activation license code in the field below and click ok. Code: 4D79FB218DF56E7EA08C15 MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 54 I N S T A L L A T I O N O F M D A S - X S O F T W A R E MDAS-X enabled and with the correct layout (shortly after installation it will temporarily show ‘ctemp’). MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 55 Q U I C K R E A D F U N C T I O N ( Q U I C K R E A D I N G F O R R E U S A B L E O R S I N G L E U S E V E R S I O N S ) MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 56 F O R R E U S A B L E O R S I N G L E U S E V E R S I O N S ) Click on "File and Preferences" MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 57 F O R R E U S A B L E O R S I N G L E U S E V E R S I O N S ) Choose the option “Logger (All Loggers)” and then click ok. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 58 C O N F I G U R I N G T H E S O F T W A R E Click on “Logger Initialization” If you want to enter a description in the “Description of ...” field Check that the date and time are correct and click Next! MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 59 C O N F I G U R I N G T H E S O F T W A R E Choose the time to start after setup and the recording duration / interval and click Next. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 60 Choose if there will be a need for the Stop function (stop the data logger using the Start button). Choose the type of memory as shown in the image and click Next ... Choose the time to start after setup and the recording duration / interval and click Next. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 61 C O N F I G U R I N G T H E S O F T W A R E Choose whether there will be any alarms that will be shown in the graph after reading the data when the data logger is finished and click OK. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 62 R E A D I N G A N D V I E W I N G T H E G R A P H I C R E P O R T MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 63 R E A D I N G A N D V I E W I N G T H E G R A P H I C R E P O R T MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 64 R E A D I N G A N D V I E W I N G T H E G R A P H I C R E P O R T MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 65 R E A D I N G A N D V I E W I N G T H E G R A P H I C R E P O R T MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 66 R E A D I N G A N D V I E W I N G T H E G R A P H I C R E P O R T MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 67 Check that the communication drivers for your computer's USB port are up to date. Check if the physical input / USB port is active / functioning. Check if the USB cable is original, supplied by MaxiTrack. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 68 The front display shows the word ´SET´ → It means that the Data Logger has received new programming. To start it, just press and hold the START button for 4 seconds. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 69: Maintenance And Cleaning
The use of common and specific cleaning products is not recommended, because, in addition to contaminants, depending on the working temperature to which the Data Logger is subjected, they can impregnate and cause stains on the external probe and housing. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 70 M I N I M U M R E Q U I R E M E N T S / P C Windows XP, Vista or 7 250 GB hard drive 0.5 Ghz processor 1 GB RAM 1 USB output Mouse / Keyboard SUPPORT Exclusive email for Technical Support to the user: eng@maxitrack.com.br MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 71 This Warranty does not cover any damage caused by the customer, loss of Temperature data or any other damage related to local Software or Equipment. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...
Page 72 Engineering and Sales: ,Tel: +55 11 5562 0337 | info@maxitrack.com.br | www.maxitrack.com.br For reasons of improving the technology used in the manufacture of our product line, this manual may change without prior notice. MaxiTrack Sensors info@maxitracksensors.com | www.maxitracksensors.com...

This manual is also suitable for:

Maxilog multiple use min max Maxilog cryo Maxilog multiple Maxilog su 3ctemp-rh Maxilog-rh ... Show all