Setting Up Antenna Tv - JVC Roku LT-43MAW595 User Manual

Setting up Antenna TV

In addition to the other entertainment possibilities of your Roku TV, you may also
want to watch broadcast channels from an antenna or cable TV service connected to
the ANT input. On your Roku TV, you watch broadcast TV in much the same way you
watch other entertainment choices. You select a tile in this case, the Antenna TV
tile from the Home screen.
The first time you select the Antenna TV tile, you have to set up the TV tuner. Setting
up the TV tuner scans for active channels and adds them to your Antenna TV channel
list.
Why do I have to set up the TV tuner?
Not everyone needs to use the TV tuner. For example, you might have a set top box provided
by a cable or satellite company that receives all of your channels. Most of these set top boxes
use an HDMI ® connection.
More and more people are watching only streaming TV and do not have a TV antenna or
remove it from the Home screen as explained in
When you set up Antenna TV, the TV scans the signals on its antenna input for channels with a
good signal, and adds those to the channel list, skipping dead channels and channels with a
very weak signal.
The TV lets you add two analog channels, even if they have no signal, for the purpose of using
an older set top box, VCR, or game console that can only output a signal on analog channel 3
Remove unwanted tiles.
Edit Antenna TV channel
48
etup
lineup.