Page 1: Table Of Contents
WEIVER Player - RF Playback System / Manual ver1 Updated 2011/11/01 manual Weiver Player 1 / INTRODUCTION 4 / WEIVER Player SYSTEM OPERATION 1.1 WEIVER Player System 4.1 WEIVER Player Operation 22 1.2 User System Requirement 4.2 Weiver_EX Installation 22 1.3 Optional Upgrade...
Page 5 Waste handling: Nationally and internationally recognized trademarks and trade names are the property of their respective holders and There is need to send material back to LUMANTEK. Please are hereby acknowledged. contact your local dealerfor information on recycling the product by sending the main parts of the product for Portions of this software are ©...
Page 6 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 OPERATOR SAFETY SUMMARY attention to the plugs, receptacles, at the point where the cord exits form the apparatus. For your protection, please read these safety instructions completely before operating the equipment and keep Attachments : this manual for future reference.
Page 7 Notwithstanding anything else in this policy or otherwise, without first contacting Lumantek for a Return Material Lumantek will not be liable with respect to the products Authorization ( “ RMA ” ) Code. If it is determined that the under any contract, negligence, strict liability or other...
Page 9 Weiver Player RF Playback System...
Page 11: Introduction
RF capture equipments. And it also can support the converting util you can convert your I/Q data file into a possible data format, .wpj, with WEIVER Player. It's all for to re-generate real world RF environments that are too complex To exact simulate.
Page 12: User System Requirement
Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 1.2 / USER SYSTEM REQUIREMENT Your PC(System) must meet the following specification. Computer / Processor Hard Disk Space - Intel Pentium 4 2.33GHz -100 MB available hard disk space...
Page 13: Weiver Player Data Flow
Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 1.4 / WEIVER Player DATA FLOW PCI - Express Interface I (16-bit) I (16-bit) Q(16-bit) Q(16-bit) Hard Disk FPGA (SSD) (16-bit) Upconverter Attenuator RF OUT 1.5 / WEIVER Player SCHEMATIC DIAGRAM...
Page 14: Weiver Player Control Configuration
Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 1.6 / WEIVER Player CONTROL CONFIGURATION (RECOMMENDED) Control Unit Cross Cable LAN(Local Area Network) WEIVER Player Ethernet router, hub, switch LAN(Local Area Network) WEIVER Player keyboard / mouse...
Page 15: Weiver Player System Spec
Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 1.7 / WEIVER Player SYSTEM SPEC Dimensions 105mm 218mm 332mm WEIVER Player System Speci cation RF Out Frequency RF output port 50ohm, N type female, Frequency band 38MHz to 1.012GHz...
Page 16: Production Description
Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 2. WEIVER Player / Product Description 2.1 / WEIVER Player COMPONENT External Component Feature Description LCD Display SSD Insert (Hot Swap) Left Button Up Button Power LED Right Button...
Page 17: Weiver Player Product Configuration
Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 2.2 / WEIVER Player Product Configuration Basic Component WEIVER Player Body WEIVER Player AC Cord WEIVER Player USB Weiver_EX Program WEIVER Player Operation Manual WEIVER Player Test Report...
Page 18: Installation Precautions
- Avoid wearing any loose-fitting clothing or loosely hanging accessories when using WEIVER Player. - Do not open the WEIVER Player case, doing so will void the warranty and LUMANTEK takes no responsibility for damage to the unit. Should you be experiencing performance issues, please contact your dealer for assistance.
Page 19: How To Control
3. WEIVER Player / How to control 3.1 / Starting WEIVER Player In Weiver Player, above program playing. We use “Weiver_ EX” program to connect Weiver Player. If we connect Weiver Player, you can view “remote” in front panel. 3.2 / Front Panel Operation [ Play ] Set -->...
Page 20 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 [ Frequency Change ] Set --> 2. Frequency --> --> Change (up / down / left / right) --> Change (up / down / left / right) Set --> Esc [ Gain Change ] Set -->...
Page 21 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 [ Spectrum Invert ] Set --> 4. Spectrum Inv. --> --> Change (up / down) Set --> Esc [ Reference 10MHz ] Set --> 5. Ref 10MHz -->...
Page 22 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 [ IP Setting ] Set --> 7. IP Setting --> --> DHCP Change (up) --> Static Change (down) --> IP Address --> Address Setting --> Subnet Mask --> Subnet Mask Setting -->...
Page 23 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 [ Version ] Set --> 8. Version --> Change ( up/down ) Set --> Esc [ System Default ] Set --> 9.System Def. --> --> Apply / Cancel...
Page 24: Weiver Player System Operation
4.1 / WEIVER Player Operation The WEIVER Player must be powered on, connected to a laptop or desktop PC that is installed with both Microsoft Windows OS and the Weiver_EX program. No need to install an additional program since WEIVER already has been installed by itself.
Page 25: Weiver_Ex Update
Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 The Weiver_EX program is being installed as shown with Click the Install button to begin the installation. the status progress bar. The Weiver_EX installation is now complete; click the Finish button to close the Installation window.
Page 26 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 Once uninstallation is finished, double-click Weiver_EX_Setup. exe to install the program. Click the Next button to proceed with the Weiver_EX Click the Install button to begin the installation.
Page 27: Ethernet Connection Method
IP address must match on the WEIVER Player and the laptop/desktop PC. To control WEIVER Player using fixed IP, move to WEIVER Player network setting menu and set IP with a passive way. it has to be done all equipped with a mouse, a monitor and a keyboard on WEIVER Player or Remote desktop on Windows OS.
Page 28: Weiver_Ex Operation
WEIVER Player Manual ver 1 / Updated 2011/11/01 4.6 / Weiver_EX Operation For the latest version of the Weiver_EX program, please consult the Download page at our homepage (http://www. lumantek.com). The detailed features and functionalities of the Weiver_EX program are explained. Weiver_EX Program IP Select...
Page 29 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 Setting Within the Setting menu there are 4 unique tabs to choose from. The second tab, Play includes Frequency, Gain, Spectrum INV and Repeat. - Frequency Support to Play the signal the user wants optionally by controlling RF Signal Center Frequency.
Page 30 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 * Weiver IQ windowing (After Weiver_EX Ver : 2.1.1.5) I Signaling Q Signaling BandWidth : 24M Imaginary Real Spectrum Windowing Complex FFT * Weiver FFT (Weiver_EX Ver : 2.1.1.5), Play Mode...
Page 31 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 - Average The Average function has Exponential features in the Spectrum View. - Unit dB The RF Power of the unit can be changed in dBm, dBmV, dBuV individually by user's difference.
Page 32 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 If user equips an external trigger and choose to turn trigger on(in previous page), When you do not push trigger : Low Level(0V) – In capture & play mode, WEIVER Player doesn’t work.
Page 33 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 Analyzer - 3D Spectrum Within Spectrum View, the spectrum can be displayed in a simulated 3D style. - 2D Spectrum By default, the spectrum is displayed as 2D style. The Complex FFT Spectrum will display captured 8M bandwidth and captured 24M bandwidth.
Page 34 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 View IQ Power @ 30MHz BW - Spectrum By adjusting the frequency in spectrum window, user can observe in-band RF signal (within range of 8M, 24M bandwidth) and by adjusting the Range Input Capture mode, the RF IN signal power can optimized by controlling range in a capture mode.
Page 35: Weiver Player Utility
Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 4.7 / Weiver Utility Backup Captured data is by default stored in the D: \ (D Drive). When the default internal storage reaches a remaining capacity of 2GB or less, the Capture function will automatically stop.
Page 36 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 Weiver Signal Tracer Introduction ‘Weiver Signal Tracer’ provides a user information regarding location, power of RF signal, velocity when analyzing the data captured by WEIVER. In many cases, many circumstantial variables, except for RF signal, makes user have problem to analyze after user captured the data with RF capture equipment.
Page 37 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 Control Menu 1. File Window ’ Displaying the file s name after choosing a file. 2. Open button Opening Windows to select .wpj file. 3. Sample Interval wpj-typed file stores information in one second however, for displaying all information at the map and chart spends plenty of time.
Page 38 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 4. Analyze button Displaying information of wpj file on map and chart, using the sample ’ s time interval. Double-click a marker on the map shows information and click it then information disappear.
Page 39 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 7. Play button Being based on an analyzed data, user can follow the actual driving route and check information. 8. Pause button 9. Stop button If stop button clicks, a map moves to start point.
Page 40 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 11. Print button User can print out a result through a designated printer. 12. Excel button This function supports user to extract an analyzed data as an Excel format file(*.csv) and open and store the file on user’s...
Page 41 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 13. Lumantek Webpage Moving to Lumantek’s webpage when user clicks the logo. 14. Play Bar Displaying the current condition during playing. User can use ‘drag and play’ function.
Page 42 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 1. Navigation Control User can control left and right or top and bottom of map by clicking navigation control and the movement of map is possible with mouse’s drag.
Page 43 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 3. Scale Control To expand or reduce the size of map, it can be controlled by clicking a mouse left-button and the other way is a mouse pointer with scroll function; pointing at the location where a user wants can change the size of the map. Double-clicking of mouse left-button at the location on the map makes it expand and doing of mouse right-button makes it reduce.
Page 44 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 Search Menu 1. Virtual Drive Searcher This function supports to search a driving test route before user has. At the route input window, 1) inputting a departure point and an arrival point and then 2) pushing enter or clicking ‘Search button. ’ activates ‘Virtual Drive searcher. ’ When it performs, a scroll bar appears on the right and, if each driving route is clicked, detailed driving routes between the departure point and the arrival point show up.
Page 45 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 2. Adress Searcher After inputting information regarding the location a user likes to see, pushing ‘enter’ or clicking ‘Address button’ activates ‘Address searcher’ and the searched result displays on the map with a marker. Address searcher service is varied for each country so please refer to the appendix, ‘Google map Service.
Page 46 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 Chart Window Chart window displays after analyze. The blue-colored graph is for a velocity of the vehicle and the red-colored graph is for RF signal’s power. According to the chart in the above, the signal sharply dropped in two times, approaching mouse pointer to these points makes information of each point indicate at the note.
Page 47 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 Satellite Window It is difficult for user to analyze geographical features only with map, in this case, ‘Satellite Window’ helps user analyze, providing satellite map which shares same center with a map. ‘Satellite window’ is automatically controlled by map window and, depending on user’s needs, can be controlled by mouse drag or wheel (Satellite Window can perform when zoom level...
Page 48 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 1. Location Informer Window If a user wants to know address and coordinates of the certain location, clicking ‘Location informer button’ makes a maker appear in the center of a map. It indicates the coordinates for the nearest address and the altitude based on the average 0 sea level.
Page 49 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 * Appendix. Google Map Service country/region map tiles geocoding street driving directions Afghanistan Yes (same as tiles) Yes (Major Roads Only) Albania Yes (same as tiles) Yes (Major Cities Only)
Page 50 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 Burkina Faso Yes (same as tiles) Yes (Major Roads, MapMaker Additions) Burundi Yes (Major Roads, MapMaker Yes (same as tiles) Additions) Cambodia Yes (Major Roads, MapMaker Yes (same as tiles)
Page 51 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 El Salvador Yes (MapMaker Only) Yes (same as tiles) Equatorial Guinea Yes (Major Roads Only) Yes (same as tiles) Eritrea Yes (Major Roads, MapMaker Yes (same as tiles)
Page 52 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 Japan Yes (same as tiles) Jordan Yes (Lacks street names) Yes (same as tiles) Kazakhstan Yes (Major Roads Only) Yes (same as tiles) Kenya Yes (Major Roads Only)
Page 53 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 Montenegro Yes (MapMaker Only) Yes (same as tiles) Yes (Major Cities Only) Montserrat Yes (MapMaker Only) Yes (same as tiles) Morocco Yes (Lacks street names) Yes (same as tiles)
Page 54 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 Rwanda Yes (Major Roads, MapMaker Yes (same as tiles) Additions) Saint Helena Yes (MapMaker Only) Yes (same as tiles) Saint Kitts and Nevis Yes (same as tiles) Saint Vincent and the...
Page 55 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 * Appendix. Google Map Language Service language code language name pt-BR ARABIC PORTUGUESE (BRAZIL) BASQUE pt-PT PORTUGUESE (PORTUGAL) BULGARIAN ROMANSCH BENGALI ROMANIAN CATALAN RUSSIAN CZECH SLOVAK DANISH SLOVENIAN...
Page 56 Click the start button on your OS and select WeiverFIleConverterUtil inside Weiver_EX Program. Once you get the window for converting, ‘ Complex type ’ files can be played on WEIVER Player. For Real type file, WeiverFileConverterUtil converts it into Complex type one and generates Log data.
Page 57: Weiver_Ex Program Introduction
To connect with WEIVER Player, a separate WEIVER Player IP List sub-window will appear. There are various methods of connecting the WEIVER Player. For most of the methods during IP Search, the subnet of the WEIVER Player unit and control PC must be matched to connect for security purposes properly.
Page 58 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 Once the WEIVER Player has successfully connected. Analyzer Menu The Analyzer Menu has five kinds of features in measuring or observing the Spectrum from Zoom to Undo. ( 3 D Spectrum Analyzer, 2 D Spectrum Analyzer, Spectrum Zoom...
Page 59 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 2D Spectrum Analyzer Spectrum Zoom in Analyzer Zoom on the area by clicking first on the left mouse button and dragging to the preferred point and then clicking on...
Page 60 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 If you want to zoom back to the previous screen, or to the original state, click on or simultaneously press Ctrl and Z. Spectrum Power Marker Band Power Analyzer The Band Power can be measured by clicking the left mouse button and dragging.
Page 61 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 View Menu Weiver_EX has four sub-windows (with dedicated functions) in the main window. Each sub-window can be repositioned and resized. Further, the Auto Window Position function will automatically resize and reposition the four windows by Auto Window Position.
Page 62 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 GPS Graph Displays current location (latitude, longitude) coordinates updated every second. The sizes of the Spectrum Graph , IQ Graph , Power Graph , GPS Graph can be adjusted at the same time.
Page 63 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 Play Mode The data files stored in a capture mode are generated in two types(File Name.iqw, File Name.log). File Name.iqw is stored in the order of [I : 2 Bytes, Q 2 Bytes], File Name.log includes the records of Name.iqw file additional information.
Page 64 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 The frequency can be changed with the mouse wheel or by double-clicking and entering in the figures. Gain 30 Gain 0 Gain -30 The transmission power can be changed with the mouse wheel or by double-clicking and entering the...
Page 65 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 Appendix. A A-1. Recorded Output File [FileName.iqw, FileName.log] FileName.iqw FileName.wpj Line 1 : $Ver, 1 ,IQ FileName,Cap_ 20110510 _ 090927 .iqw,IQ Rate, 30000000 ,Center, 474000000 ,Tracking, 1 ,AGC, 0 Line 2 : $GAIN, 22 .
Page 66 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 A-2. Weiver Player MER Range Relation RF IN Power : -60dBm RF IN Power : -30dBm...
Page 67 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 A-3. Configurable Repeat Play...
Page 68 WEIVER Player Manual ver 1 / Updated 2011/11/01 Appendix. B Ghost 15.0 Restore - Please insert the USB Recovery Disk into USB port of Weiver Player system. Before the Recovery process, Weiver Player system must be set to use Boot from USB CD-ROM at BIOS configuration.
Page 69 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 - Please click the Recover My Computer button on Home tap - Please click the Next button.
Page 70 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 - Please click the OK button. - Please click the Browse button.
Page 71 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 - Please select the Weiver_Player_C.V 2 I file in CD(USB-CD) Drive - Please click the Next button.
Page 72 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 - Please click the Edit button. - Please select target to C drive...
Page 73 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 - Please click the Next button. - Please click the Finish button.
Page 74 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 - When you click the Yes button, recovery process will be start.
Page 75 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 - When recovery process finished, please click the Close button. - Please click the Exit button.
Page 76 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 - Please click the Yes button. After this process, Weiver Player system must be reboot.
Page 77 Please run ewf_off file on Weiver ’ s desktop for the EWF disablement. * Note : Before the Weiver Player installation or upgrade, EWF must be a disable state. Also, EWF Function must be Working on Weiver ’ s desktop screen...
Page 78 Player / Operational Manual WEIVER Player Manual ver 1 / Updated 2011/11/01 After the Weiver Player Installation or Upgrade, Please run ewf_on file on Weiver ’ s desktop for the EWF enablement. Please reboot the Weiver ’ s system for applying EWF enablement.
Page 80 LUMANTEK #1208, Woolim Lion’s Valley II, 680 Gasan-Dong, Gumcheon Gu, Seoul Korea (153-830), Tel: +82 2 2027 2400, Fax: +82 2 2027 2409 Printed in KOREA © Lumantek Co., Ltd. CopyRight 2011 WWW.LUMANTEK.COM...

Lumantek WEIVER Player Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lumantek WEIVER Player

Summary of Contents for Lumantek WEIVER Player

Table of Contents