Breville the Smart Air LAP168 Instruction Book page 10

Viral protect night glow purifier
Table of Contents

Advertisement

• For continuous operation, press the
TIMER button repeatedly until there are no
lights illuminated under the timer intervals.
FILTER RESET
• The filter reset light will illuminate red
indicating that the filter needs to be replaced.
• Replace the filter according to the directions
found under Replacing the Filter in this book.
• Once the filter is replaced, press and hold
FILTER
for 3 seconds to reset the Filter
RESET
Reset light.
• The built-in timer for the filter reset is 4,320
operating hours.
NOTE
For best performance, the filter should be
cleaned at least monthly as per the instructions
found in the Care, Cleaning & Storage section
of this book.
10
AROMA TRAY
• Press the aroma tray on the side of the
purifier and it will click out of the unit.
• Add 2–3 drops of essential oil (not included)
directly to the pad in the aroma tray.
• Push the aroma tray back into the purifier
until it clicks into place.
• Turn the purifier on and the aroma will start
emitting automatically with the fan. Increase
the fan level as desired.
WARNING
Never add essential oil directly inside the unit
or in the aroma tray without the felt pad.
Do not use more than 2–3 drops of oil on the
aroma tray felt pad at any one time. Only add
more oil when the aroma in the surrounding air
has dissipated.

Advertisement

Table of Contents
loading

Table of Contents