Summary of Contents for United Technologies interlogix TVM-2700
Page 1
All manuals and user guides at all-guides.com TVM-2700 / TVM-3200 / TVM-4200 Monitor User Manual P/N 1072765C-EN • REV 1.0 • ISS 05MAY14...
Page 2
Interlogix is part of UTC Building & Industrial Systems, a unit of requirements and other relevant provisions of Directive United Technologies Corporation. All rights reserved. 2004/108/EC. Trademarks and patents Trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products..
All manuals and user guides at all-guides.com Content Important safeguards Installation cautions: Important safeguards 1 • Do not block any ventilation openings. Introduction 2 • Always ensure that the monitor is Features 2 located in a well-ventilated area to prevent the unit from overheating. Connections 2 •...
All manuals and user guides at all-guides.com Features Lightning: For added protection during a lighting storm or when this unit is left unattended and unused for long periods The convenient and user-friendly on- of time, unplug the unit from the wall screen display allows for easy and outlet and disconnect the cable system.
All manuals and user guides at all-guides.com ▲ CAM2 R/L Up Arrow (*) Audio signal input left and right for CAM2 Primary Function: Automatically adjusts the display to the most optimal setting CAM2 In/OUT possible. (VGA mode only) Composite signal input and output for CAM2 Secondary Function: Allows for vertical scrolling in the OSD menu.
All manuals and user guides at all-guides.com MUTE Hot keys Turn the sound on and off. Selects signal in order. SOURCE VGA - HDMI - DVI – CAM1 NUMBER Buttons – CAM2 - SVIDEO Press the number buttons in order of 7,8,9,0 to unlock the keypad lock.
All manuals and user guides at all-guides.com Adjustment procedure Not used. R22 POSITION Not used. R23 ZOOM Select the screen format (CAM/HDMI mode only). R24 SIZE Not used. R25 SKIP Not used. R26 PIP Not used. R27 S. SWAP Not used. R28 SOURCE Not used.
Page 8
All manuals and user guides at all-guides.com (Advanced Settings) 4-3 DCR (optional) The dynamic contrast ratio (DCR) automatically adjusts the screen brightness. Turn DCR on or off. 4-4 DCC (optional) The dynamic contrast control (DCC) automatically adjusts the screen contrast. Turns DCC on or off. VGA Setting 5-1 Auto adjust Automatically choose the correct...
Page 9
All manuals and user guides at all-guides.com Balance Screen Format Adjust the sound balance of the left and Select the aspect ratio (16:9/4:3). right speakers. OSD Time out Bass (optional) Adjust the display of the OSD menu (5 to When you select User mode, adjust the 60 seconds).
All manuals and user guides at all-guides.com Keypad Lock Sharpness Turn the keypad lock on or off. Adjust the image quality of the display. (DVI mode is not available). Remote Control Lock (optional) Turn the remote control lock on or off. Tint (cam mode only) Adjust the tint of the image.
Page 11
All manuals and user guides at all-guides.com Sound (Time Setting) Menu Language Sound Mode Select the OSD language. Choose a different preset sound mode or your own customized sound. (Standard/ Screen Format Movie/ Music/ User) Select the aspect ratio (16:9/4:3/ ZOOM1/ ZOOM2/ FULL(HDMI mode Balance only)).
All manuals and user guides at all-guides.com Memory Recall Reset the screen to the factory preset display settings. Press any key to cancel. Lock Monitor is turned off when it does not receive any signal from the remote control or any button within the time that set up.
All manuals and user guides at all-guides.com Troubleshooting Symptom Check Picture is jittery Adjust Clock to set the screen position and adjust the Clock value carefully until there is no noise Monitor stand Face of monitor displayed. attached here stand arm No picture Check if the power switch The monitor’s installation surface is...
Page 14
All manuals and user guides at all-guides.com Symptom Check Adjust the volume of the sound card in the computer. VIDEO screen Check if PICTURE mode cannot be seen has been set. Check if the video terminal is properly connected. No video Check if the video cable is correctly connected to the computer and set to...
All manuals and user guides at all-guides.com Items TVM-2700 TVM-3200 25.35 x 16.85 x 7.87 29.17 x 19.33 x 7.87 W x H x D (box) 749 x 542 x 276 mm 887 x 654 x 293 mm 29.49 x 21.34 x 10.87 34.92 x 25.74 x 11.54 in.
Page 17
All manuals and user guides at all-guides.com Items TVM-4200 model Interface VGA in (15 Pin D-Sub) DVI in HDMI in CAM in/out Audio in (RCA type) S-Video in/out PC stereo in Head phone out Transmitter Remote control Power Consumption < 90 W Source 90 to 260 VAC Special feature...
All manuals and user guides at all-guides.com Factory preset timings Pixel Format Horizontal Vertical Freq.(Hz) Remark Freq.(KHz) 720 x 400 31.469 70.087 all models 640 x 480 31.469 59.940 all models 640 x 480 37.861 72.809 all models 640 x 480 37.500 75.000 all models...
Page 19
All manuals and user guides at all-guides.com...
Page 20
All manuals and user guides at all-guides.com...