Table of Contents
Advertisement
Position hoses as shown when routing hoses to left side
of washer (facing from front).
About the Aqua-Secure Hose
The Aqua-Secure hose prevents potential flooding in the
event the hose develops an internal leak. If the hose
leaks, the indicator turns red and water flow is blocked.
Once the internal valve in the hose activates (indicator is
red) the hose must be discarded. Contact customer
service for a replacement.
Water drain hose connection
NOTICES
Do not reuse an old drain hose. Only use the drain
▯
hose and parts included with your washer.
Do not kink or modify the water drain hose.
▯
Height of drain point
Height difference between the floor and drainage point:
max. 39 in. (100 cm).
16
Types of drainage hookups
Standpipe
Attach the drain hose to the elbow included with your
washer.
Position the elbow on the drain hose 4" from end of hose
as shown. Insert this section of the drain hose into the
drain pipe. Secure the elbow and hose with a nylon tie
strap or the equivalent to keep the hose from coming out
of the drain pipe during use.
Sink siphon
Secure the drain hose to the sink siphon using a
Ø 0.9 - 1.6 in. (20-44 mm) hose clip (available from a
hardware store).
Advertisement
Table of Contents
