Philips 42BDL5055P User Manual page 48

42BDL5055P
3)Storage Path
Show default path: Internal storage
Note:
Can only display Internal storage, cannot be modified.(Only show
path)
4) Will show Server is unbinded if Remote control server feedback
unbinded status.
5) Port
Set up FTP port number. Default: 2121
Note:
Input limitation
(1) Length: Max 5 characters
(2) Range: 1024 ~ 65535
(3) Format: Number 0-9
(4) Unavailable port: 5000
(5) The port number must more than 1024
3. Remote Control
Via Enable/Disable to Control Remote Control On/Off
User can input Server address. If server does not registered, it will ask
user for PIN code.
Bind status:
(1) Will show network is disconnected if not yet connects to network.
(2) Will show Server is disconnected if network connected but
remote control server disconnected.
(3) Will show Server is unbinded if Remote control server feedback
unbinded status.
(4) Will show Server is binded if Sever binded successfully.
34