Whittier Wood Furniture 2091AFGSP Assembly Instructions Manual

Whittier Wood Furniture 2091AFGSP Assembly Instructions Manual

64"w pacific sound bar console

Advertisement

64"W Pacific
Sound Bar Console
Model #
2091AFGSP;
2091AFCAF
AFGAC = Glazed Spice finish
AFCAF = Caffè finish
Congratulations!
This fine piece of furniture will make a gorgeous
addition to your home. For the best results, read the
Assembly Instructions before you begin your project.
CALL US FIRST!
Service Policy: We will replace any part that is
defective, missing or damaged during assembly.
For a replacement part, directly contact Whittier
Wood Products customer service department by
phone, fax, mail or email.
Hours: Our friendly customer service staff can be
reached Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific
Time). You may leave a message 24 hours a day,
seven days a week.
800-653-3336
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
P.O. Box 2827
Eugene, OR 97402 USA
from furniture tip-over. To help prevent tip-over:
For normal household use only. Not recommended
for commercial use.
Unload items before you move this unit.
Before you load or move this unit, check to make
sure all screws and supports are tight.
Do not climb, sit or stand on this piece of furniture.
Do not not overload drawers or shelves on this unit.
Handle the glass plates with care. Glass is fragile.
Before you begin your project, completely read the
Assembly Instructions.
Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on
a cold and possibly damp cement floor).
Periodically inspect your furniture for any loose
glue joints, screws or any other problem that might
affect the stability of your furniture. Tighten or
repair as needed.
This assembly requires two people.
Do not return this item to the store.
To Order: Provide the furniture model number (found
above the illustration of this unit), the part letter,
production code, quantity needed, reason for replacement,
and your full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one
or two business days from the time we receive your
request. Please allow five to ten business days for delivery.
• Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
Production Code:
VN
Serious or fatal crushing injuries can occur
Place heaviest items in the bottom drawers.
Unless specifically designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
Never allow children to climb or hang on drawers,
doors or shelves.
Never open more than one drawer at a time.
Use of tip-over restraints may only reduce
but not eliminate the risk of tip-over.
IMPORTANT NOTES:
.
09/10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2091AFGSP and is the answer not in the manual?

Questions and answers

Summary of Contents for Whittier Wood Furniture 2091AFGSP

  • Page 1 Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over: Place heaviest items in the bottom drawers. Model # 2091AFGSP; Unless specifically designed to accommodate, do not set TVs or other heavy objects on top of this product.
  • Page 2 2091AFGSP; 2091AFCAF 64"W Pacific Sound Bar Console — Parts List Please identify the parts and check that quantities received match those on this list. If you need to replace a part, refer to the following letter and model number. Quantity...
  • Page 3 2091AFGSP; 2091AFCAF 64"W Pacific Sound Bar Console — Parts List continued Please identify the parts and check that quantities received match those on this list. If you need to replace a part, refer to the following letter and model number.
  • Page 4 2091AFGSP; 2091AFCAF 64"W Pacific Sound Bar Console Assembly Instructions Tool Required: Phillips Screwdriver Place the console at its final destination. Rotate the Adjustable Glides (ZA and ZB) found on the bottoms of the legs until the unit is level. See Figure 2.
  • Page 5 Fig. 4b Unlocked Position Fig. 4a Locked Position Fig. 4 To insert your media components and access wires into the console more easily, you may want to remove the Removable Backs (D). To do so, unlock the Turn Buttons (ZL) as shown in Figures 4 and 4b. Slide the Backs away and place them off to the side.
  • Page 6 Side adjustment 4mm (5/32") To move the door towards the side panel, loosen screw ‘1’ and tighten screw ‘2’. To move the door away from the side panel, loosen screw ‘2’ and tighten screw ‘1’. Hinge Depth Adjustment 4mm (5/32") Loosen screw ‘2’...

This manual is also suitable for:

2091afcaf

Table of Contents