SAFETY GUIDE Turn o the machine before moving it. When the machine is working, do not separate the water tank from the base. Do not block the outlet or add water to the mist outlet which may cause water leakage, deformation, or failure and void the warranty.
Page 4
3. If there is any fault happen, please 4. Unplug the power plug when filling unplug it immediately and contact us and cleaning. via support@turbro.com. 5. Power cord with damage or product 6. Please cut the power cord when fall or drop, please call the professional disposing this product;...
GETTING TO KNOW YOUR HUMIDIFIER PRODUCT DETAIL 3 Different Nozzles Nozzle Handle Display Body 2 Ways Water Tank Extension Tube 4 Ways On/O Humidity Mist Timer Auto Water Level Light Sleep Light Remote Control...
Page 6
PRODUCT STRUCTURE A. Sink G. Water Filter B. Atomizer H. Water Tank C. Remote Control Holder I. Wheels D. UV Lamp J. Nozzle E. Power Cord K. Cover F. Air Outlet L. Mist Cover...
SPECIFICATIONS Product Name Humidifier Model Number GLH20WIFI Voltage 120V/60Hz Power 105W Capacity Mist Output 700-1000ML/H Noise ≤35dB Timer 1-12 H Safety Function Waterless Auto Shut-o Dimensions 10.4 x 11.3 x 25.9 Inches Weight 9.5 Lbs GETTING STARTED PLACEMENT This humidifier should be placed on a firm...
Page 8
Direct sunlight. On an unstable platform. With high temperatures, humidity, and/or dust. Near an air conditioner, furnace, heater, or stove. Near mobile phones, computers, and other precision instruments. Near the radio and other objects that emit radio waves.
Page 9
REMOTE CONTROL The battery is included in the remote control. 1. Replace the battery: Press and pull out the battery ring. Put a lithium battery CR2025+ on the top. 2. Operation: Use the remote control within 13 feet of the humidifier.
USING YOUR HUMIDIFIER PANEL Touch this button to turn on the machine. The LED display shows the current humidity and temperature (the display switches every minute). Note: This humidifier has power-o memory function. The present settings will be saved and the preset operation will resume when the power is on again.
Page 11
Long press this button on the panel for 3 seconds or press the sleep button on the remote to enter sleep mode. The display and atmosphere light will be o . Press any button to wake the panel.
Page 12
Press this button on the panel for 3 seconds or press the auto button on the remote to enter the auto mode. This mode will adjust the mist spray level automatically according to the ambient humidity, and the brightness of the display will reduce by 50%.
Page 13
CONNECTION Entering the Wi-Fi connection mode Preparation before connecting preparation: Make sure your Wi-Fi router supports 2.4GHz (NOT 5GHz) and 802.11b/g/n bands. Note: Most 5GHz routers can also be set to 2.4GHz band or dual band. Make sure the Wi-Fi name and password are correct.
Page 14
Step2 Connect your phone to the 2.4 GHz network your humidifier will use. Open AIRIA and tap the “+” icon in the top right corner. It will appear an added page, click “Go to add”.
Page 15
Step3 Go to the next step. Enter the password of your Wi-Fi network when prompted (same Wi-Fi network on which your smartphone is connected) and then click confirm. Important note: The humidifier must be connected to a 2.4 GHz Wi-Fi network.
Page 16
CONTROL On/O Auto mode Other setting Mist spray level Atmosphere light Time setting UV light Water level indicator light Sleep mode In the "ON" mode, the humidifier will constant to humidify, the app will display as "ON".
Filter Impurities in Water The filter ball is a mineral stone, which improves the water quality, increases water activity, and adjusts the pH of water. This water filter is recommended to be replaced every 6 months. Filter element ball...
Page 18
If accidents happen, such as the machine falling down, or water going inside the unit, please unplug the machine and let it dry, then contact our after-sale service via support@turbro.com or call at (323) 438-3334. This machine is for indoor use only. This machine is not suggested to use on the wooden floor in case of any damage by moisture.
TROUBLESHOOTING Fault Reasons and Solutions Issues Analysis Troubleshooting method Power is not connected Check the power connection No power The new machine is closed Open the water tank and leave tightly it for 12 hours before use The spray of...
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject tothe following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
FCC RADIATION EXPOSURE STATEMENT This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual.
WARRANTY & CUSTOMER SUPPORT WARRANTY TURBRO provides a 1-year limited warranty for TURBRO products from the date of purchase, subject to the following conditions and limitations outlined below. What is covered? This warranty is limited to the repair or replacement of part(s) proved to be defective in material or workmanship, after said defect is confirmed...
Page 23
CUSTOMER SUPPORT We are here to help anytime! Any problems, write to us via support@turbro.com. We will get back to you within 1 business day.
Need help?
Do you have a question about the Greenland GLH20WIFI and is the answer not in the manual?
Questions and answers