Speedlink SNAPPY - Wireless USB Mouse Quick Install Guide

Ports Overview (Fig. 1)

Replacing the Battery (Fig. 2)

Buttons Overview (Fig. 3)

Utilization

1. Plug the nano USB receiver into any free USB port on your computer. The operating system will automatically detect the device.
2. Open the battery compartment on the base of the mouse. Insert two AAA batteries (1.5V), making sure the polarity is correct. Close the battery compartment again.
3. Switch the mouse on by setting the switch on the base to ON. If you do not intend to use the mouse, simply set the switch to OFF to save energy.

Intended use

This product is only intended as an input device for connecting to a computer. Jöllenbeck GmbH accepts no liability whatsoever for any damage to this product or injuries caused due to careless, improper or incorrect use of the product or use of the product for purposes not recommended by the manufacturer.

Declaration of Conformity

Jöllenbeck GmbH hereby declares that this product conforms to the relevant safety regulations of EU Directive 1999/5/EC. The full Declaration of Conformity can be requested via our website at http://www.speedlink.com.

Handling batteries

Keep batteries out of children's reach. Only use the specified battery types. Never mix old, new or different types of battery. Always replace old or weak batteries promptly. Dispose of your old batteries in accordance with localregulations.

Technical support

Having technical problems with this product? Get in touch with our Support team – the quickest way is via our website: www.speedlink.com. ;
Alternatively, you can email them at: eu-support@speedlink.com.