Advertisement
Power Output: 10W
Frequency Response
for main speaker: 50Hz-20KHz
Power Supply: DC9V
When the battery is charging, the CHARGE STATUS lights red. After the battery has fully charged, the light turns to be green.
Press POWER/INPUT button on the front panel to select the mode(LINE,USB,BT OR FM).
Recording: Insert USB card, plug in microphone, long press REPEAT button on the front panel, then the machine displays "rEC" to start recording, short press the REPEAT button to stop recording and play the recording automatically, press POWER/INPUT to return to USB card playing state.
Play the recording: Insert USB card, long press to play the recording file and press
Or
button to select recording file.
By pressing PREVIOUS/NEXT button on the front panel, you can select a specific song from the play list.
To stop playing the current track, please press PAUSE/PLAY button on the front panel.
Press it once again to continue playing
Twist the dial anticlockwise to decrease the volume and clockwise to increase the volume.
MIC IN JACK
Plug in microphone directly for playing.
USB JACK
Insert USB card directly for playing
Bluetooth:
Please press POWER/INPUT button on control panel to select Bluetooth mode. Simultaneously open the Bluetooth setting on your phone, tablet or any other bluetooth enabled audio device and select "QFX PBX-12P"(no need to match code),the unit and device will then connected via Bluetooth. Press the "next song" and "previous song" button on the control panel to select the song, press" play/pause" button to control the playing status.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the PBX-12P that isn't answered in the manual? Leave your question here.