Bluetooth® Pairing; Playback Control; Call Control; Using The Voice Assistant Feature - Energetics Sport 4 User Manual

Bluetooth® pairing
Switch on your Earphones Sport 4 True Wireless. The LED status indicator (3) on both earbuds starts flashing and the
earbuds pair automatically. Only one of the LED status indicators (3) will continue blinking. This means the earbuds
have entered pairing mode. Select Earphones Sport 4 True Wireless from the list of Bluetooth devices on your
smartphone or Bluetooth music player and press ?connect?. Both devices will be connected immediately and without
codes. You will also hear a confirmation sound. At this point, the LED status indicator (3) flashes slowly in blue.
If you previously paired the earbuds with a device, it is not necessary to repeat the process. Just enable the Bluetooth
connection on your music player and switch on your Earphones Sport 4 True Wireless. They will sync with it
automatically.

Playback control

Play / Pause
Press the Left or Right multifunction button (1 or 2) twice in a row to resume playback or pause the music.
Volume + / Volume -
Press the Left or Right multifunction button (1 or 2) to turn the volume up or down.
Skipping to the next / previous track
Press and hold the Left or Right multifunction button (1 or 2) for 2 seconds to skip to the next or previous track during
music playback.

Call control

Once the Earphones Sport 4 True Wireless and your smartphone are paired, you can control calls from the earphones.
Answering / Ending a call
To answer an incoming call, press the Left or Right multifunction button (1 or 2) twice in a row. Press the same button
twice to hang up.

Using the Voice Assistant feature

You can interact with your smartphone voice assistant using your Earphones Sport 4 True Wireless. To do so, press the
Left multifunction button (1) three times in a row. You can give the voice command after 2-3 seconds when hearing the
confirmation sound.

Charging the battery

Earphones
When the battery level of your Earphones Sport 4 True Wireless is below 10%, you will hear a low battery warning
sound. To charge the earphones battery, put the earbuds back in the charging case. The earphones LED status indicator
(3) lights up and switches off once the charging process is complete.
Charging case
When the battery level of the charging case is below 10%, the first LED of the Charging indicator (charging case) (4)
starts flashing. Plug the USB Type-C end of the provided cable into the USB Type-C charging port (5), and the other end
into a 5 V USB charging device. The LEDs of the Charging indicator (charging case) (4) light up as the battery charges.
Once the charging process is complete, all LEDs will glow.
Important: We recommend not leaving neither your Earphones Sport 4 True Wireless nor your charging case unused
for long periods of time with an empty battery. We advise charging the battery at least once a month.
Caution: Do not charge your headphones with fast charging adapters or dedicated laptop charging adapters, Because
their output voltage exceeds 5V and the device may become unusable.
7/9 energysistem.com