Subscribe to Our Youtube Channel
Related Manuals for real living LYNBROOK SQ A302006400
Summary of Contents for real living LYNBROOK SQ A302006400
- Page 1 LYNBROOK SQ FIREPIT TABLE ASSEMBLY INSTRUCTIONS ITEM#: A302006400 SKU# 810495063 Need help? We are here for you! 1(866)578 – 6569 24/7 • Toll Free...
- Page 2 WARNING： INSTALLER： For Outdoor Use Only. Installation Leave this manual with the appliance. and service must be performed by a quali ed CONSUMER： Retain this manual for installer, service agency, or the gas supplier. future reference. DANGER FIRE OR EXPLOSION HAZARD If you smell gas: 1.
-
Page 3: Table Of Contents
TABLE OF CONTENTS General information - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 Specification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4 Important safety information and precaution... -
Page 4: Specification
SPECIFICATION Product name Lynbrook Sq Firepit Table Model NO. A302006400 Rated Heat Output 37,000 BTU/HR Fuel Propane - LP Gas Supply 20 lb. LP - Gas cylinder Manifold Pressure 11 Inches W.C. Orifice Size (diameter) 1.9mm Gas Supply Pressure Max. 250 PSI Min. - Page 5 • Open the door and inspect the hose assembly and burner prior to each use. If there is evidence of excessive abrasion or wear or if the hose or burner is damaged, it must be replaced by appropriate part from the manufacturer. •...
-
Page 6: Expanded View
EXPANDED VIEW 6/20... -
Page 7: Parts List
Parts List Label Part Number Description Part Image P003100058 P002100438 Table Top P004100151 Door Frame P004100150 Door P004000311 Back Panel P003800374 Left Panel P003800522 Right Panel P006700042 Cylinder Rack P002500105 Bowl P006600049 Lava Rock P005100328 Chain Foot pad P005300069 Pre-assembled 7/20... - Page 8 Hardware Pack Label Part Number Description Part Image Bolt M6*15 H010020011 Bolt M6*35 H010020013 Flat washer H050030001 Wrench M6 H090010017 If you want to replace the parts listed, please contact Customer Service Center: 1(866) 578-6569. 8/20...
-
Page 9: Installation
STEP 1 Attached Bowl(K) to Table Top(B) with Bolt(H1) and Flat washer(H3), tighten the bolts to 100% depth with Wrench(HW). 9/20... - Page 10 STEP 2 Attached Left Panel (F) and Right Panel(G) to Cylinder Rack(J) with Bolt(H1) and Flat washer(H3),The ring on the Cylinder rack (J) shall be close to the Right panel(G), tighten the bolts to 80% depth with Wrench(HW). 10/20...
- Page 11 STEP 3 Attached Door Frame(C) and Back Panel(E) to Left Panel (F) and Right Panel(G) with Bolt(H2) and Flat washer(H3), , tighten the bolts to 80% depth with Wrench(HW). 11/20...
- Page 12 STEP 4 Attached Chain(N) to Left Panel (F) and Right Panel(G) with Bolt(H1) and Flat washer(H3), , tighten the bolts to 80% depth with Wrench(HW). 12/20...
- Page 13 STEP 5 Attached the assembled table body to the assembled table top with Bolt(H1) and Flat washer(H3), , tighten all the bolts to 100% depth with Wrench(HW) at last . 13/20...
- Page 14 STEP 6 Insert Door(D) Door Frame(C), attract on with a magnetic touch. 14/20...
- Page 15 STEP 7 Lid must be removed when burner is in operation. Pour the Lava Rock(L) into the Bowl(K), attached the Lid(A) on. 15/20...
-
Page 16: Location
LOCATION Your Gas appliance must be installed on a flat, stable surface, away from any combustible materials or construction. SET - UP Your Gas appliance comes assembled, ready for a Gas connection. 1 - Remove the appliance from container box and place it on any level, outdoor, non-combustible surface. -
Page 17: Operation
OPERATION: LEAK TEST !!!WARNING!!! ・ Do not use an open flame to check for leaks. ・ Do not amoke during testing. ・ Do not test indoors. ・ A leak check must be performed whenever the gas cylinder is replaced. 1 - Make sure the control knob is in the “OFF” position. 2 - Make sure the gas cylinder is correctly and securely connected to the pressure regulator, without over tightening. -
Page 18: Storage And Maintenance
NOTE: While in use, the burner flame should be mainly blue in appearance with a small amount of yellow. The flame can be identified by the following figure. Warning: Lighting the Fire Pit improperly could lead to an unsafe condition. 7 - Press in and turn the control valve knob clockwise to OFF to shut down fireplace. -
Page 19: Trouble Shooting
TROUBLE SHOOTING: PROBLEM OBSERVED POSSIBLE CAUSE CORRECTIVE MEASURES Gas odor Gas leak See “If you smell gas:” on front cover of manual Check all gas connections Delayed ignition Low gas pressure Check gas supply pressure Clean burner ports-see manual Clogged or dirty burner section ports Blocked orifice Check orifice opening... - Page 20 Parts List Label Part Number Description Part Image P005100088 Metel Nesting Lid 1 Note: Remove the lid and put the protective mesh screen over your burner and lava rock when in use! CAUTION: Please be advised that this fire pit table uses natural lava rock that may crackle or pop when it is used.
Need help?
Do you have a question about the LYNBROOK SQ A302006400 and is the answer not in the manual?
Questions and answers
How to add back & door panel once ) is attached to the top area too big.
How do I order a replacement part for this?