Transportation Instructions - Beko COOL74FDS Installation, Operation & Food Storage Instructions

Frost free combi fridge freezer
Table of Contents

Advertisement

Transportation Instructions

1. The appliance should be
transported only in a vertical
upright position. The packing as
supplied must be intact during
transportation.
2. If during the course of transport
the appliance has to be
transported horizontally, the
product must only be laid on its
right hand side (when facing the
door front) and it must not be
operated for at least 4 hours to
allow the system to settle after
the appliance is brought back to
upright position.
3. Failure to comply with the
instructions could result in damage
occurring to the appliance. The
manufacturer will not be held
responsible if these instructions are
disregarded.
4. The appliance must be protected
against rain, moisture and other
atmospheric influences.
5. When positioning your appliance
take care not to damage your
flooring, pipes, wall coverings etc.
Do not move the appliance by
pulling by the door or handle.
6. Empty any water in the drain tray
and Water Dispenser tank before
moving. See section 'Defrosting'
and 'Care & cleaning' for further
information.
7. Make sure that the defrost water
pipe at the back of the product is
fixed to the plastic evaporating pan
on the top of the compressor, to
avoid defrost water spillage on the
floor.
8. The appliance must be protected
against rain, moisture and other
atmospheric influences.
Important Care must be taken
when carrying the appliance to avoid
touching the bottom of the condenser
metal support/pipework at the back of
the appliance as you might injure your
fingers and hands or damage your
product.
Important Make sure that mains
cable is not caught under the
appliance during and after carrying/
moving the appliance, to avoid
the mains cable becoming cut or
damaged.
Do not attempt to sit or stand on top
of your appliance. You could injure
yourself and damage the appliance.
"IMPORTANT: Care must be taken
while cleaning / carrying the appliance
to avoid touching the bottom of the
condenser metal wires at the back of
the appliance as you might injure your
fingers and hands.
"IMPORTANT: This appliance is
not designed for stacking with any
other appliance.When positioning your
appliance, take care not to damage
your flooring, pipes,wall coverings etc.
BEKO plc declines to accept any
liability should the instructions not be
followed.
9
EN

Advertisement

Table of Contents
loading

Table of Contents