MicroPower 2D1H101 User Manual

MICROPOWER — User guide
DC/DC CONVERTER 700
2D1H101
12–24V
INTENDED USE
The DC/DC converter transforms the 12 V battery system
to 24 V loads, where stable voltage is required. Suitable for
automotive, utility vehicles, or forklift applications.
FEATURES
• Isolated version
• Waterproof and shock resistant
• Aluminium casing
• Compact and easy to operate
• Advanced switching technology
• On/Off function
• High efficiency
• Input protected against
• reversed polarity
• overvoltage
• Output protected against short circuit
MECHANICAL INSTALLATION
• Install the DC/DC converter on a metallic surface with
good heat dissipation ability.
• Can be installed both vertically and horizontally.
• Avoid high ambient temperature.
• Position the DC/DC converter so the air supply is not
obstructed.
• Ensure ventilation around the DC/DC converter.
• The DC/DC converter should always be securely fastened.
• Protect both input and output cables with suitable fuses.
• The mounting holes are suitable for M8 screws.
SAFETY FIRST
Read and understand this instruction before using,
installing or servicing the product.
Only qualified personnel should install, use or service this product.
CAUTION, hot surface during operation.
Keep heat-sensitive objects away to avoid damage.
CAUTION, undesirable consequences.
The output of the converter has no protection against
reverse battery polarity. Always verify the battery
polarity before connecting the cables to the converter.
Output cables are always to be connected first.
Disconnect the battery before maintenance, servicing
or dismantling.
Do not operate the unit if there is any evidence of
damage.
OPERATION
Input voltage @25 °C
a Start-up voltage 5 ± 0.5 V
b–c Nominal operation 10–16 V
d Overvoltage shut down 20.5 ± 0.5 V
e Recovery voltage 18.7 ± 0.5 V
f Shut-down voltage 4 ± 0.5 V
DIMENSIONS
Nominal power
Reduced power
Off