Autoslide AUTOPLUS Quick Start Manual

SETUP

1
Connect the antenna to the back of the AutoPlus and
tighten by turning clockwise. Position the antenna to
a straight up position.
2
Plug the Ethernet cord into your router and connect
the other end to the back of the AutoPlus.
3
Connect the power cable to the AutoPlus
and plug the power adapter into a working
outlet.
Requirements:
Internet Service.
Router with available ethernet port.
Active Autoslide owner account for AutoSlide,
MultiDrive, or AutoSwing.
4
Compare the lights on the AutoPlus to the
LED Logo Indicator chart on page 2 to ensure
they are functioning properly.
5
Complete your AutoPlus setup by following the "Pair
a Device" instructions in the Autoslide app.
Check these before beginning the pairing
process for AutoPlus:
• An AutoSlide, MultiDrive, or AutoSwing is
installed and paired successfully to your phone
as the owner.
• Latest version of the AutoSlide app is
downloaded and installed on your phone.
• AutoPlus is connected to the router and a live
internet connection.
6
After configuration, control your doors with the
Autoslide app.
To test the Autoslide app, open the app, select your
device, and press Inside to activate a door opening.