Advertisement
MCI-GM53
Operation (cont.)
Accessing Installer Setup
Press and hold the small lock icon in the top right corner of the camera setup
menu to access installation settings (Fig. G).
See next page for available adjustments.
Installer Setup
1. Adjust Dynamic Parking Lines - Adjustments to the dynamic curve lines
can be made from this menu (Fig. I, aftermarket cameras only).
2. Enable / Disable Aftermarket Backup Camera - You can enable an
aftermarket reverse camera input here (Camera Input 4)
3. Display CAM3 or CAM4 in Multicam View - Third camera in 3-way split
view can be switched between inputs 3 and 4.
Adjustment of Dynamic Parking Lines
1. These icons adjust the position of the lines on the screen.
2. This icon changes the appearance of the lines.
3. These icons changes the sensitivity of the movement of the lines
when turning the steering wheel.
Pacific Accessory Corporation
Check out the collection of car stereo / video installation parts we offer.
Multi Camera Input Interface
for select General Motors Vehicles
Fig. G
Fig. H
Fig. I
1 2
3
Rev. V2
Date: 072419
Page 4
Advertisement
