mikirad 20/MR/R Instructions For Use

IV.
Use mild detergents for cleaning and disinfection. Do not use
1.
corrosive or abrasive products!
NOTE: Do not use agents containing naphtha, solvents,
acids, chlorine etc. for cleaning soft surfaces!
Product marking is performed in the form of an identification label
2.
attached to each device. The label contains the following
information:
 number indicating the date of manufacture:
 LOT: RRRR-MM ( RRRR means the year, MM means the
month, e.g.: 2023-01)
 name and type of product e.g.: REF: 20/MR/R
 allowed body weight of the user
All devices (except for caps) have a 2-year warranty.
3.
Use the devices as directed! Any bending of the metal parts with
4.
visible cracks on the surface exclude the device from further use.
Check the device before and during use to ensure that
it has no scratches, cracks, etc.
The production service during the warranty period (24 months)
5.
includes replacement of parts or products, which are found to have
any manufacturing defects.
The MIKIRAD operational service functions directly at the points
6.
of sale of the products.
MIKIRAD guarantees the production of spare parts for 10 years from
7.
the date of manufacture of a product.
- -
date of actualization: Juni 2023 -
NOTES ON USE
INSTRUCTIONS FOR USE
MOVABLE WALKERS
MIKIRAD manufactures movable walkersas medical devices for improving
the mobility of people with disabilities (according to In-house Specification
ZN-00/MK-01-5/2010 harmonised
– Class 12 06 and EUROPEAN COUNCIL DIRECTIVE 2017/745 [MDR]
of 5 April 2017)
PN EN ISO
9999
12 06 03 - Framed walker
12 06 06 - Framed walker with 2 wheels
Walkers are handled with two hands, and have four points
of support terminated, depending on device type, with protective caps
and/or wheels.
I. GENERAL NOTES
Our walkers are designed
surfacesonly.
Standard products are designed for users (with lower limb disability) with
height of 155cm to 185cm and body weight of up to 120 kg.
Walkers can be adjusted to the user's height by extending or sliding
in the telescopic tube in 20 mm increments.
Once you are done secure the bottom tube with the latch
(containing two steel pegs matched to the holes in the fixed and movable
tubes).
The height of the walker is correct wherethe user can stand as much upright
as possible and the product performs satisfactorily. See part II of this
manual for adjustment instructions.
Setting the height of the walker correctly will significantly
extend its lifetime.
with standard PN-EN ISO 9999
NAME TYPE
-20/MR/R
-20/MR/R.2K
for use on level indoor