Page 1
Metallskärare, mini Metal cutter mini Item No: 74109...
Page 2
Kontaktinformation ett litet verktyg eller tillbehör att göra ett större industriverktygs jobb. Modifiera inte Verktygsboden Erfilux AB detta verktyg och använd det inte i ett syfte Källbäcksrydsgatan 1 som det inte var avsett för. SE-507 42 Borås • Klä dig rätt. Ha inte löst sittande kläder eller Telefon: 033-202650 smycken, då...
Page 3
Montera på en arbetsbänk i trä 1. Mät tjockleken på din arbetsbänk. För att säkert montera din metallskärare på en arbetsbänk i trä, rekommenderas det att ha träet under fästpunkterna. 2. Använd två bultar, muttrar och platta brickor med lämplig längd för din arbetsbänk. Bultar 3.
Page 4
Användning 4. Dra handtaget (#9) mot dig medan du matar 1. Se till att spärrhaken (#11) sitter i spärren metallplåten i skärhjulet (#2). (#12) på sidan som är närmast dig, enligt 5. Dra upp handtaget (#9) till vinkelrätt, så att Figur 4.
Page 5
Contact a larger industrial tool. Do not modify this tool PELA Tools or use it for a purpose for which it was not Solängsvägen 13 intended. SE-513 70 Borås • Dress appropriately. Do not wear loose Telefon: 033-202650 clothing or jewelry, as they can get caught in E-mail: order@pelatools.se...
Page 6
Mount on a wooden workbench 1. Measure the thickness of your workbench. To securely mount your metal cutter to a wooden workbench, it is recommended to have the wood under the attachment points. 2. Use two bolts, nuts and flat washers of the appropriate length for your workbench.
Page 7
4. Pull the handle (#9) toward you while feeding 1. Make sure the latch (#11) is in the latch (#12) the sheet metal into the cutting wheel (#2). on the side closest to you, as shown in Figure 5. Pull the handle (#9) up to perpendicular, 4.
Page 8
Verktygsboden Erfilux AB Källbäcksrydsgatan 1, SE-507 42 Borås...
Need help?
Do you have a question about the 74109 and is the answer not in the manual?
Questions and answers