Advertisement
Hex I/O Expander
Introduction
Congratulations on your purchase of this SynQuaNon product! It is our belief that our
products will enable you to find new and interesting ways to create custom sounds
with your synthesizer and other SynQuaNon modules. Check out our full line at
www.synquanon.com.
➊
I/O
DC-coupled inputs or outputs 1 - 6; accept +/- 12V signals.
Wired to both SynQuaNon Audio and CV Bus connectors on rear.
Hex I/O Expander User Manual
Module front panel overview
➊
Page
1
of
3
Advertisement
Table of Contents
Summary of Contents for SynQuaNon Hex I/O Expander
- Page 1 Hex I/O Expander Introduction Congratulations on your purchase of this SynQuaNon product! It is our belief that our products will enable you to find new and interesting ways to create custom sounds with your synthesizer and other SynQuaNon modules. Check out our full line at www.synquanon.com.
- Page 2 Overview The Hex I/O Expander module adapts six audio or CV signals connected to the front panel to SynQuaNon Audio and/or CV Bus connections on the rear. The module is entirely passive. Conversion can be from 3.5mm jacks to SynQuaNon Bus or the reverse.
- Page 3 Allows for connection of other brand modules to SynQuaNon Audio and/or CV Bus connections on rear of SynQuaNon modules. • Can be used to add six more audio/CV inputs and/or outputs to SynQuaNon modules. • Minimizes front panel patch cable lengths if placed close to other brand modules while using appropriate length SynQuaNon Bus cable inside case.
Need help?
Do you have a question about the Hex I/O Expander and is the answer not in the manual?
Questions and answers