Summary of Contents for MUSETEC AUDIO MH-SA001
- Page 1 MUSETEC AUDIO MH-SA001 User’s Manual Volume Standby MUSETEC AUDIO MUSETEC© AUDIO All Rights Reserved www.mu-sound.com...
-
Page 2: Dear Customer
MUSETEC AUDIO Dear Customer, Thank you very much for choosing our products. Before use, please be sure to read this document carefully, that will help you quickly and accurately obtain the use method. Notice! First, please confirm the voltage specification of your home. - Page 3 MUSETEC AUDIO Packing list MH-SA001 Remote Controller Power cable Warranty Card Screwdriver Front Panel Volume Standby MUSETEC AUDIO (2) (3) (4) (5) (1) Displayer (2) Standby Key (3) Red Status LED Working mode LEDStatus Standby mode Normal Operation with display on Off...
- Page 4 MUSETEC AUDIO OUTPUT-RIGHT INPUT-RIGHT INPUT-LEFT OUTPUT-LEFT (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) INPUT-RIGHT INPUT-LEFT AC IN FUSE Trigger out MH-SA001 SERIAL NO. MSA001 MUSETEC AUDIO MUSETEC AUDIO (15) (16) (17) (18) (19) (20) XLR (Balanced) output of right channel. RCA (Single ended) output of right channel.
-
Page 5: Control Area
MUSETEC AUDIO Thebalancedinput and outputpin assignment. 1. GND 2. Positive + 3. Negetive - Remote Controller Key Name Function Preamplifier Area POWER Power on/off LIGHT Display light ENTER Settings confirm ▲ MENU Settings menu POWER LIGHT Pre- MUTE Mute the output amplifi... - Page 6 MUSETEC AUDIO The main window. (1) Indicate input channel number. From Ch1 to Ch5. The input channel can be set by short-push the rotary knob on the front panel or press Ch1 to Ch5 keys on the remote controller. (2) Indicate mute status.
- Page 7 MUSETEC AUDIO Display brightness setting. It has10steps.Thebrightnesscan be changed bypresstheLIGHT key ontheremotecontroller. 20%/30%/40%/50%/50%/60%/70%/80%/90%/100%/ Auto off In AUTOOFFmode, the displayer will be automatically turned off if there is no key operation within 30 seconds.
- Page 8 MUSETEC AUDIO Settings window. The way to enter the Settings window. 1. Long-push the rotary knob. 2. Press MENU key on the remote controller. The way to change the value of each item. 1. Short-push the rotary knob. 2. Press the Enter keyontheremotecontroller.
-
Page 9: Specifications
MUSETEC AUDIO Specifications Item Test Condition Characteristics Max input Voltage f=1Khz XLR 9.8Vrms THD=0.1% RCA 4.9Vrms Volume= -20dB Voltage Gain Vin=2Vrms +13.6dB f=1Khz (XLR to XLR) Volume= 0dB (RCA to RCA) Max output Voltage f=1Khz XLR 19Vrms THD=0.1% RCA 8.5Vrms... - Page 10 MUSETEC AUDIO MUSETECAudio2022www.mu-sound.com...
Need help?
Do you have a question about the MH-SA001 and is the answer not in the manual?
Questions and answers