Therapeutic Deep
Tissue Percussion
Massage Gun
A Closer Look
Controls
see next page for details.
Attachment
Head Slot
USB-C
Charging
Port
ATTACHMENTS:
The SMARTGUN Elite comes with 4 different attachments.
heads.
SPHERICAL
BULLET
U-SHAPED
HEAD
HEAD
HEAD
HEAD
Operation
POWER & CONTROLS
SMARTGUN Elite is cordless and rechargeable.
Before use, fully charge for 3 hours, no matter if the indicator light
shows the battery is charged. SMARTGUN Elite can run up to 3.5
hours on a single charge.
CHARGING
To recharge, insert the included proprietary USB-C Cord into the port
below the power button of the SMARTGUN Elite. Connect the USB-C
end of the charging cord to a USB-C port of a computer or a USB-C
wall adapter and plug into an electrical outlet. As the SMARTGUN
Elite charges numbers on the display will blink indicating charging
is in progress, and once it is fully charged the blinking will stop. DO
NOT overcharge which can shorten the battery life. Disconnect the
Charging Cord when not charging the device. The SMARTGUN Elite
should be powered OFF and cannot be used while charging.
SMART COMFORT PULSE
1. Smart Comfort Pulse Technology allows for a safe massage
experience by initiating a turbo massage action after the
SMARTGUN makes contact with the body, giving the user
complete control and awareness of when the massage will begin.
CONTROLS
The SMARTGUN Elite has 2 buttons below the digital display to
operate the device :
1. Press and hold the Power /+ button of SMARTGUN for three
continuous seconds to turn it ON or OFF (AUTO shut off after 15
minutes.)
2. Press the + or - button to increase (+) or decrease (-) speed.
3. Turn the Smart Comfort Pulse ON/OFF by pressing the activation
FLAT
button.
Usage Guide
LED INDICATORS
Display the power level. And
indicate charging status.
POWER BUTTON AND
SWITCH SPEED BUTTONS
Used to alternate speeds and to
turn on/off your massage gun.
SMART COMFORT PULSE ACTIVATION
Allows for a safe massage experience by initiating the turbo
percussion after the Smartgun makes contact with the body
SWITCHING THERAPEUTIC HEADS:
IMPORTANT
Always make sure your
device is turned off
SMARTGUN Elite
before changing massage heads.
Pull to remove
Push to place
SWITCHING MASSAGE HEADS
SMARTGUN Elite
heads can be switched indefinitely by a simple
pull and push into place action. Always pull and push in the axis
of the connecting slot of the device. Do not twist or shake as this
could damage the attachment head and/or device connecting
slot, leading to potential mechanical failure of the percussion
action of the
SMARTGUN Elite.
Need help?
Do you have a question about the SMARTGUN Elite and is the answer not in the manual?
Questions and answers