Rear Panel Jacks - Curtis Mathes CM25020 Owner's Manual

Y
O U R

Rear Panel Jacks

Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
Because there are two sets of input jacks, you can connect two different A/V
components (i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting equipment, see pages 2.1 – 2.7.
ΠCOMPONENT VIDEO INPUT
( Y, PB, PR)
(For models CM27020S/CMF2010S)
Use these jacks to connect the component video
signal from a DVD player.
´ VIDEO INPUT
Video signals from VCRs, DVD players and similar
devices.
ˇ AUDIO INPUTS
Audio signals from VCRs, DVD players and similar
devices.
1.3
C O : Y N
HAPTER NE OUR EW
N T V
E W
TV
¨ AUDIO MONITOR OUTPUTS
Send audio signals from the TV to an external
source such as a VCR.
ˆ SUPER VIDEO INPUT jack
(For model CM25020S)
S-Video signal from an S-VHS VCR or laserdisc
player.
Ø VHF/UHF (75 )
Connect to an antenna or to a cable TV system.