VELA TOUCH
AREA TOUCH / TOUCH AREA
AREA TOUCH / ZONE TOUCH
1
2
3
MOTORE
BATTERIA / BATTERY
BATTERIE / BATTERIE
1
2
1.1
DESCRIZIONE
Radiocomando multifunzione rolling code 433.92 MHz
1 canale, UP-DOWN-STOP
2
PROGRAMMAZIONE DEL TRASMETTITORE
Con questa procedura si programma un canale per abbinarlo a una ricevente compatibile.
Per eseguire la seguente procedura è necessario accedere alla ricevente.
PROCEDURA:
1- Attivare la ricevente sulla quale si vuole utilizzare il trasmettitore in modalità
"programmazione radio di trasmettitori multifunzione" e selezionare la funzione che
si desidera abbinare al tasto (vedi il manuale della ricevente)
2- Fare una pressione con il tasto desiderato, il led della ricevente emette
tre lampeggi per segnalare l'avvenuta ricezione.
3- Il trasmettitore torna allo stato di stand by.
1.1
PRODUCT FEATURES
Multi-function remote control rolling code 433.92 MHz
1
channel, UP-DOWN-STOP
2
TRANSMITTER PROGRAMMING
This procedure is used to programme a channel in order to then associate it with a
compatible receiver. Access to the receiver is required to carry out the following procedure.
PROCEDURE:
1- Activate the receiver on which you want to use the transmitter in "multifunctional
remote control radio programming" mode and select the function that you want to associate with the
key (see receiver manual).
2- Press the desired key; the receiver's LED flashes three times
to signal it has been received.
3- The transmitter goes back into stand-by.
1.2
DATI TECNICI
IT
Alimentazione
Batteria CR 2450
Durata batteria
Circa 3 anni
Codifica
Rolling code
Frequenza radio
433.92 MHz ISM
Portata
100 m (interno di edifici: 40 m)
Dimensioni
40 mm x 40 mm h 10 mm
1.2
TECHNICAL DATA
EN
Power supply
Battery CR 2450
Battery life
About 3 years
Code
Rolling code
Radio frequency
433.92 MHz ISM
Range
100 m (40 m inside buildings)
Dimensions
40 mm x 40 mm h 10 mm
Need help?
Do you have a question about the VELA TOUCH MOTORE and is the answer not in the manual?
Questions and answers